OWNER’S GUIDE MPT 48V ELECTRIC POWERED VEHICLES 615581-GB LLl ISSUED AUGUST 2010 REVISED APRIL 2011
WELCOME Thank you for purchasing this vehicle. Before driving the vehicle, we ask you to spend some time reading this Owner’s Guide. This guide contains the information that will assist you in maintaining this highly reliable vehicle. Some illustrations may show items that are optional for your vehicle. This guide covers the operation of several vehicles; therefore, some illustrations may not represent your vehicle. Physical differences in controls will be illustrated.
FOREWORD OWNER’S GUIDE ELECTRIC POWERED VEHICLE MPT 800 48V MPT 1000 48V STARTING MODEL YEAR 2011 E-Z-GO Division of TEXTRON Inc. reserves the right to incorporate engineering and design changes to products in this Manual, without obligation to include these changes on units leased/sold previously. The information contained in this Manual may be revised periodically by the E-Z-GO Division, and therefore is subject to change without notice.
FOREWORD Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. This vehicle has been designed and manufactured in the United States of America (USA). The Standards and Specifications listed in the following text originate in the USA unless otherwise indicated. The use of non-Original Equipment Manufacturer (OEM) approved parts may void the warranty. Overfilling batteries may void the warranty.
FOREWORD TITLE PAGE NO. SAFETY INFORMATION SECTION ............................................................................................................................................................... .1 GENERAL SPECIFICATIONS SECTION .......................................................................................................................................................11 INTRODUCTION SECTION...........................................................................................
FOREWORD Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
SAFETY INFORMATION TABLE OF CONTENTS FOR SAFETY INFORMATION SECTION TITLE PAGE NO. SAFETY ................................................................................................................................................................................................................. 3 NOTICES, CAUTIONS, WARNINGS, AND DANGERS......................................................................................................................................... 3 GENERAL ....................
SAFETY INFORMATION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
SAFETY INFORMATION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. SAFETY For any questions on material contained in this manual, contact an authorized representative for clarification. Read and understand all labels located on the vehicle. Always replace any damaged or missing labels. On steep hills it is possible for vehicles to coast at greater than normal speeds encountered on a flat surface.
SAFETY INFORMATION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. This manual has been designed to assist in maintaining the vehicle in accordance with procedures developed by the manufacturer. Adherence to these procedures and troubleshooting tips will ensure the best possible service from the product.
SAFETY INFORMATION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Never modify the vehicle in any way that will alter the weight distribution of the vehicle, decrease its stability or increase the speed or extend the stopping distance beyond the factory specification. Such modifications can result in serious personal injury or death. Do not make any such modifications or changes.
SAFETY INFORMATION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. The manufacturer cannot anticipate all situations, therefore people attempting to maintain or repair the vehicle must have the skill and experience to recognize and protect themselves from potential situations that could result in severe personal injury or death and damage to the vehicle.
SAFETY INFORMATION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
SAFETY INFORMATION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. ! 1. WARNING 9. 2. < 14û 25% READ MANUAL WARNING READ MANUAL FOR MAXIMUM LOAD BED CAPACITY. MAXIMUM RAMP/HILL SECURE LOAD MAX AS FAR FORWARD XXX lbs. AS POSSIBLE. XXX kg MAXIMUM LOAD BED 10. 3. WARNING USE CAUTION IN INCLEMENT WEATHER CAPACITY ! 4. WARNING DO NOT OPERATE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL 5.
SAFETY INFORMATION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. 15. PP 16. 17. 18. PP 3 2 1 H 2O CLEAN UP GASOLINE SPILLS WITH WATER BEFORE STARTING ENGINE UNLEADED GASOLINE DO NOT SPILL FUEL ON A HOT ENGINE PP PP 28. 29. DO NOT DISPOSE OF BATTERIES IN LANDFILL DO NOT DRIVE ON HIGHWAY 30. WINDSHIELDS DO NOT PROVIDE PROTECTION FROM FLYING OBJECTS GROUND FUEL PUMP 19.
SAFETY INFORMATION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. 45. HEADLIGHTS KEEP ARMS AND LEGS WITHIN VEHICLE 37. UNLOCKED 46. 38.
GENERAL SPECIFICATION TABLE OF CONTENTS FOR GENERAL SPECIFICATIONS SECTION TITLE PAGE NO. MPT 800 48V ELECTRIC SPECIFICATIONS..................................................................................................................................................... 13 MPT 1000 48V ELECTRIC SPECIFICATIONS....................................................................................................................................................
GENERAL SPECIFICATION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
GENERAL SPECIFICATION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
GENERAL SPECIFICATION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
GENERAL SPECIFICATION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. 10 in (25 cm) 47 in (119 cm) 65.5 in (166 cm) 105.3 in (267 cm) (Front) 37 in (94 cm) (Rear) 38 in (97 cm) 35 in (89 cm) 48.5 in (123 cm) MPT™ 800 18 in (46 cm) 47 in ( 119 cm) 11.5 in (29 cm) 77 in (196 cm) 111 in (282 cm) (Front) 38 in (97 cm) (Rear) 38 in (97 cm) MPT™ 1000 50 in (127 cm) 42.5 in (108 cm) Fig.
GENERAL SPECIFICATION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. RECOMMENDED MAX RAMP GRADE 25% or 14o MAX RECOMMENDED MAX SIDE TILT 25% or 14o MAX TURNING CLEARANCE DIAMETER MPT ™ 800 MPT ™ 1000 19 ft (5.8 m) 22 ft (6.7 m) Fig.
INTRODUCTION TABLE OF CONTENTS FOR INTRODUCTION SECTION TITLE PAGE NO. FEATURES .......................................................................................................................................................................................................... 18 General Information...................................................................................................................................................................................
INTRODUCTION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. FEATURES General Information If the vehicle is equipped with factory installed custom accessories, some accessories remain operational with the key switch in the ‘OFF’ position. ALL accessories that do NOT use the accessory wiring harness MUST be connected to draw from the entire 48 Volt battery pack.
INTRODUCTION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. 1. Key Switch / Headlight Switch To reduce the possibility of component damage, the vehicle must be stopped before moving the key switch/direction selector.
INTRODUCTION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. 9. Hip Restraint - Front The front hip restraints are designed to help keep the occupants properly positioned in the event of sudden vehicle position changes. 10. Hour Meter The hour meter indicates total hours of operation. If the vehicle is equipped with lights, the key switch has a position to operate them, indicated by the light icon. 11.
INTRODUCTION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. 13. Glove Box An optional lockable glove compartment is located on each side of the instrument panel. 14. Cup Holder A cup holder is provided for convenience of both the driver and passenger. 15. Steering Wheel The steering wheel located in front of the driver seat is used to steer the vehicle.
INTRODUCTION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. 20. Ash Tray The vehicle is equipped with ash tray as an option. 21. Utility Bed To reduce the possibility of severe injury or death, read, understand and follow the Danger label affixed to the front of the load bed. Never fill a gas can in the bed of a vehicle. Static discharge could ignite gasoline vapor and cause an explosion. MAX 400 lbs.
INTRODUCTION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
INTRODUCTION Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
OPERATING PROCEDURES TABLE OF CONTENTS FOR OPERATING PROCEDURES SECTION TITLE PAGE NO. SERIAL NUMBER LOCATION............................................................................................................................................................................. 26 BEFORE INITIAL USE .........................................................................................................................................................................................
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. SERIAL NUMBER LOCATION Two serial number and manufacture date code plates are on the vehicle. One (PART C) is placed on the body below the front, driver side of the seat, PART D is placed on the frame weld tube. The other (PART A and PART B) is located on the crossmember section of the chassis on the driver side (seat back support).
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Improper use of this vehicle could result in severe injury or death. The ST series are light duty utility vehicles. They are NOT All Terrain Vehicles (ATV’s). This vehicle is not a toy and using it while engaging in horseplay is dangerous. Plan carefully before using the vehicle to go significant distances over questionable terrain.
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Disconnect the DC supply before making or breaking the connections to the battery while charging. Do not open or disassemble charger. Do not operate charger if the AC supply cord is damaged or if the charger has received a sharp blow, been dropped, or otherwise damaged in any way – refer all repair work to qualified personnel.
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Ha Provide Protection From Elements ng ing Ho les Keep cooling fins clean and free of dirt and debris NEMA 15 - 5R Grounded AC Receptacle 110 - 120 VAC. Dedicated 15 AMP Circuit Locations outside the US and Canada: Reference appropriate local electrical code and charger manufacturer recommendations for AC power requirements (7. 3.
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. RED FLASH = fault code LED Fault Codes: RED FLASH: Light turns on briefly, but does not flash after that - check for valid AC voltage.
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. 3. Keep the cooling fins free of dirt and debris, do not expose the charger to oil, dirt, mud or to direct heavy water spray when cleaning equipment. 4. Inspect the plug of the battery charger and the vehicle receptacle housing for dirt or debris. Clean the DC connector monthly or more often if needed.
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. MPT 800 48V TRUCOURSE TECHNOLOGY SYSTEM™ GENERAL TruCourse Technology (TCT) system vehicles are operated in one of three modes or “performance options”. All options have standard features that control, protect and diagnose the vehicle. The options are defined as follows: 1.
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. 3. Locate the vehicle diagnostic port and remove the environmental cover. 4. Connect the handheld diagnostic tool and select the desired performance setting. 5. Disconnect the handheld diagnostic tool, replace the environmental cover and seat.
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. NOTICE TCT vehicles operate only in the ‘RUN’ position. If all of the following events occur with the switch in ‘RUN’ position a) the vehicle has been stopped for more than one second. b) the accelerator pedal has been released for more than one second. c) the vehicle begins to roll above 2 mph (3 kph).
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Example: If all of the following events occur... a) the vehicle is being driven down a slope b) the vehicle attempts to exceed the specified top speed with the accelerator pedal depressed or released the regenerative braking will limit the speed of the vehicle to the specified top speed (the warning beeper will not sound).
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Example: If all of the following events occur... a) the system senses that the accelerator pedal is depressed (power applied to motor) b) the brake is engaged so as to prevent vehicle motion the TruCourse Technology system will sense a stalled motor condition and remove power from the motor.
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Do not hold vehicle on hill by using accelerator and motor. Leaving motor in a stalled condition for more than 3 - 4 seconds will cause permanent damage to motor. To reduce the possibility of permanent damage to the drive system, it is important to prevent excessive roll-back when starting the vehicle on a hill.
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. MPT 1000 48V PRECISION DRIVE SYSTEM™ Precision Drive System™ (PDS) vehicles are operated in one of four modes or “performance options”. All options have standard features that control, protect and diagnose the vehicle. PDS vehicles operate only when the Run - Tow/Maintenance switch is in the ’RUN’ position.
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. If the operator attempts to override the regenerative braking feature by moving the direction selector or key switch to another position, the warning beeper will sound and the vehicle will brake rapidly until it reaches the speed of approximately 2 mph (3 kph).
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Default Mode Feature In the unlikely event of certain electrical system failures, the PDS controller will default to a mode that will permit the vehicle to operate, but at a very reduced speed. This feature allows the vehicle to be driven back to its storage facility where the problem can be diagnosed.
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. COASTING To reduce the possibility of severe injury or death from coasting at above recommended speeds, limit speed with service brake. Uncontrolled coasting does not occur with PDS model vehicles because the PDS controls the top speed of the vehicle while moving down hill.
OPERATING PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
MAINTENANCE PROCEDURES TABLE OF CONTENTS FOR MAINTENANCE PROCEDURES SECTION TITLE PAGE NO. VEHICLE CLEANING AND CARE ....................................................................................................................................................................... 45 Vehicle Cleaning........................................................................................................................................................................................
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. VEHICLE CLEANING AND CARE Vehicle Cleaning To reduce the possibility of severe injury or vehicle damage, read and understand all instructions supplied by manufacturer of pressure washer. When pressure washing exterior of vehicle, do not use pressure in excess of 700 psi.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. This vehicle is not a toy. If not operated properly and responsibly, it can cause severe injury or death to the operator, passengers or bystanders. All operators should possess a valid driver’s license. Children should not be permitted to operate the vehicle.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Lifting the Vehicle Tool List Qty. Floor jack ................................................................................................................................................................ 1 Jackstands........................................................................................................................
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Tire inflation should be determined by the condition of the terrain. See GENERAL SPECIFICATIONS section for recommended tire inflation pressure. For outdoor applications with major use on grassy areas, the following should be considered. On hard turf, it is desirable to have a slightly higher inflation pressure.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Unidirectional Tires Some vehicles may be fitted with unidirectional tires. These tires may be identified by a directional arrow on the sidewall. Be sure to position the wheel on hub correctly with arrow indicating direction of rotation when moving forward.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. TRANSPORTING VEHICLE TOWING To reduce the possibility of severe injury or death: Use extra caution when towing a vehicle. DO NOT ride on the vehicle being towed. DO NOT attempt to tow the vehicle with ropes, chains or any device other than a factory approved tow bar. DO NOT tow the vehicle on highways.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. before servicing. Wear eye protection when working on the vehicle. Use extra care when working around batteries, or using solvents or compressed air. To reduce the possibility of causing an electrical arc, which could result in a battery explosion, turn off all electrical loads from the battery before removing battery wires.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Over time, a subtle loss of performance may take place; therefore, it is important to establish the standard with a new vehicle. The Periodic Brake Performance Test should be performed regularly as an evaluation of braking system performance. It is useful as a method of identifying subtle loss of performance over time.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. LUBRICATION Do not use more than three (3) pumps of grease in any grease fitting at any one time. Excess grease may cause grease seals to fail or grease migration into areas that could damage components.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. HARDWARE ALL TORQUE FIGURES ARE IN FT. LBS. (Nm) Unless otherwise noted in text, tighten all hardware in accordance with this chart. This chart specifies 'lubricated' torque figures. Fasteners that are plated or lubricated when installed are considered 'wet' and require approximately 80% of the torque required for 'dry' fasteners.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. PERIODIC SERVICE SCHEDULE Check Clean, Adjust, etc. Replace To perform service that is listed in this schedule but not described in this manual, contact a local Service Representative or see the Repair and Service Manual for this vehicle.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Wrap wrenches with vinyl tape to prevent the possibility of a dropped wrench from ’shorting out’ a battery, which could result in an explosion and severe personal injury or death. Battery A battery is defined as two dissimilar metals immersed in an acid.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. DO NOT overfill batteries. The charging cycle will expel electrolyte and result in component damage. A battery being charged will ’gas’ with the majority of the gssing taking place at the end of the charging cycle. This gas is hydrogen with is lighter than air.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. The watering device should only be used if the electrolyte level is less than 1/2” (13 mm) above top of plates. ..
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Battery Cleaning To prevent battery damage, be sure that all battery caps are tightly installed. To reduce the possibility of damage to vehicle or floor, neutralize acid before rinsing battery. To reduce the possibility of damage to electrical components while cleaning, do not use a pressure washer.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Battery Replacement Before any electrical service is performed on TruCourse technology model vehicles, the Run-Tow/Maintenance switch must be placed in the ‘Tow/Maintenance’ position.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Do not overfill batteries. The charging cycle will expel electrolyte and result in component damage. • • • • • • The electrolyte level in all cells must be at the recommended level and cover the plates.
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. NOTICE Do not perform a hydrometer test on a battery that has just been watered. The battery must go through at least one charge and discharge cycle in order to permit the water to adequately mix with the electrolyte. The temperature of the electrolyte is important since the hydrometer reading must be corrected to 80° F (27° C).
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Prolonged Storage Battery charger, controller and other electronic devices need to be disconnected since they will contribute to the premature discharge of batteries. During periods of storage, the batteries will need attention to keep them maintained and prevent discharge.
REGISTRATION AND WARRANTY To register your vehicle, go to http://www.ezgo.com For warranty information, go to http://www.ezgo.com For Genuine E-Z-GO Parts & Accessories, contact your local E-Z-GO dealer or visit www.shopezgo.
REGISTRATION AND WARRANTY Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
DECLARATION OF CONFORMITY DECLARATION OF CONFORMITY (EUROPE ONLY) Owner’s Guide Page 67
DECLARATION OF CONFORMITY Page 68 Owner’s Guide
DECLARATION OF CONFORMITY Owner’s Guide Page 69
DECLARATION OF CONFORMITY Notes: Page 70 Owner’s Guide
E-Z-GO Division of Textron Inc., 1451 Marvin Griffin Road, Augusta, Georgia 30906 - 3852 USA Europe Ransomes Jacobsen Limited West Road, Ransomes Europark, Ipswich, IP3 9TT English Company Registration No. 1070731 www.ransomesjacobsen.com Order Desk: 00 44 (0) 1473 276 222 Help Desk 00 44 (0) 1473 276 277 Service Parts Manuals, as well as Repair and Service Manuals are available from a local Distributor, an authorized Branch, Genuine E-Z-GO Parts & Accessories Department or at www.shopezgo.com.
