Specifications
E-Z-GO Division of Textron, Inc., 1451 Marvin Griffin Road, Augusta, Georgia
USA 30906-3852 Phone: 1-800-774-3946, FAX: 1-800-448-8124
Page 2
AIR FILTER/ENGINE INSPECTION CHECKLIST
T
urn key to off and remove the negative (-) battery cable at the battery to prevent the ve
hi
-
c
le moving and the possible personal injury that may result.
1. Inspect governor / throttle system, repair or replace as required:
a. Inspect governor / throttle system to assure it has not been tampered with
.
If tampering has occurred, reset or replace as required to factory
specifications.
b. Inspect governor cable to assure free travel without sticking
c. Inspect pedal box micro-switch to assure proper timing
Proper Micro Switch Adjustment
W
hen the system is in correct adju
stment, the micro switch in the accelerator pedal box will click when the top of
t
he accelerator pedal moves approximately 1/2" - 5/8" (13 -
16 mm). The accelerator cable (as seen at the rear
a
xle) should have some slack present and not show any movement until after the micro switch clicks.
d. Inspect throttle stop for proper closing
Bulletin No.
3B-05