User's Manual
2
1.3 Usage Precautions
Do not use extension cords as there is a risk of fire and electrical shortage.
If use is necessary, check that the extension cord has the following:
1. Identical plug, cable size and the same electrical wiring as the DCBS.
2. Make sure the equipment is securely connected before use.
When unplugging the cord from the outlet, hold the frame of the plug to avoid damaging the
plug or power cord. Pulling the cord may cause the cable plug to break. Replace power cord
immediately if damaged.
If the outlet shape does not fit the plug, please contact the E-XTEQ service department.
Phone: 1.877.453.3265
E-mail: serviceusa@e-xteq.com
Do not touch the power connector during use
Keep away and Do Not Touch restricted areas of this
Equipment
The battery contains chemicals that may
generate explosive gases. Before handling the
battery, remove all metal accessories such as
rings, bracelets and necklaces.
Short circuit at battery terminals may
cause burns.
Do not place batteries near flames or other heat
sources.
Do not charge frozen batteries/modules.
The battery fluid is highly corrosive. If the
battery fluid gets on your skin or clothes,
immediately wash it with soap and water. If
electrolyte gets in your eyes, immediately flush
with cold water for at least 10 minutes and seek
medical attention.