User's Manual

3.3 Power Cable Connection and Power On

Input power information

Voltage: 100 – 240 V

Frequency: 50/60 Hz

Consumption: 2 kW (Maximum)

Connect the power cord to the connector located on the back of the DCBS, then connect

the opposite plug to a standard electrical socket. Switch on the device by setting the switch

to the “I” position.

3.4 BAC Input

After trolley has been setup, turn on the remote and follow the steps below to input the

BAC Code into the tool. (BAC code is required to generate warranty code)

4. Input BAC Code and Press Enter,

then Back to Save.

1. Go to the Settings Menu.

3. Go to the BAC Icon

2. Go to the Information Icon