User's Manual

6
SECTION 3 – Initial Setup
3.1 Installation
The unit needs to be placed in a clean, dry and ventilated area.
Tools necessary to assemble trolley:
4mm Allen Wrench, 10mm Socket/Wrench. (Step 1, 2 and 3)
3mm Allen Wrench. (Step 4)
Once the unit is out of the box, the next step is to connect the docking station to the trolley.
3.2 Battery Cable Clamps Connection
Remove the battery cable clamps from the box to connect them through the connector in
the rear of the DCBS Trolley.
1
2
3
4