User Manual

shorter preamble type.
Beacon Period (ms): Define the duration between beacon packets.
RTS Threshold: Designed to prevent the Hidden Node issue, a problem happens in
the wireless network when two wireless adapters served by the same AP can’t
communicate each other or have collision.
Fragment Threshold: Increase the transmission efficiency by split mechanism.
Transmit Power: Select the transmit power options including Lowest, 25, 50, 75,
100(default). High transmit power allows the card to have better data transfer
quality.
Enable TX Burst: Check to enable the card to transmit more data in a frame interval.
Use Turbo rate (72/100Mbps) when applicable: Enhance the data rate transmitted
up to 72/100Mbps. This checkbox is currently disabled.
No forwarding among wireless clients: Click to define a client’s data only transferred
by AP and can’t communication other clients to prevent packets from looping
among wireless clients.
Hide SSID: Click to hide the SSID from broadcasting in a wireless network.
Use Short Slot Time when applicable: Click to enhance the maximum transmit
power.
Auto Channel Selection at next boot: Click to select the best channel at next boot.
Default: Reset all settings.
Apply: Apply to new settings.
7.2.2 Security Button
Authentication Type: Define an authentication type of a new wireless network.