User Manual

Access Control: Control Client stations’ access rights to this card.
WDS: Enable to wirelessly connect other APs to extend current wireless network.
MAC Table: Show the MAC address of each connected station.
Event Log: Record the card’s current traffic information.
Statistics: Monitor the card's current traffic activity.
About: Hardware information of this card and its software elements.
7.2 Config Tab
7.2.1 Config Tab
Wireless Mode: Select 802.11b mode or 802.11b/g mix mode.
TX Rate: Specify the data transfer rate. In 802.11b mode, the rate varies from 1 -
11Mbps; in 802.11b/g mix mode, the rate varies from 1 - 54Mbps.
Channel: Specify the channel.
SSID: The specific name of this card in the wireless network.
Use MAC Address
: Click to use the MAC address of this card to be the SSID.
Security
: Specify the security settings. Refer to 7.2.2 Security Button.
802.11b/g Protection: 802.11b uses CCK modulation and 802.11g uses
CCK–compatible OFDM modulation. Enable this to prevent the data collision in the
concurrent 802.11b/g network. Auto (auto-detect) selection is recommended.
802.11b TX Preamble: Select the length of the CRC block for communication
between this card and other stations. High network traffic areas should use the