User's Manual

channel to avoid interference, please check with your wireless access

point to manual to see how to change the wireless channel setting.

z If you placed your system far away from the wireless network (200-300

feet) indoors, you may want to consider purchasing a wireless extender

kit to get a better signal strength to your system.

z If the Internet is down, check to make sure your wireless access point is

getting Internet connection, before troubleshooting the wireless

adapter portion.

z You may want to try renewing your IP address, if your wireless network

is using DHCP you can simply restart the system or try the following:

For Windows 2000 and XP, Windows Vista users:

1. Go to your start menu

2. Select “Run...”

3. Type in “cmd” and enter (without the quotes)

4. In the command prompt window, type in “ipconfig /release” (without the

quotes)

5. When it displays your IP address as 0.0.0.0, type in ipconfig /renew”

(without the quotes)

6. Once it gives you a new IP address, you should be connected to your

wireless network

For Windows 98 SE and ME users:

1. Go to your start menu.

2. Select “Run…”.

3. Type in “winipcfg” and enter (without the quotes).

4. Click on the “release all” button.

5. Click on the “renew all” button.

6. When Windows complete the renew process, you should be connected to

your wireless network.

Try other ports for your adapters. For example: