User's Manual

User’s Manual V1.0
7
z Click on “Basic” including WAN Setup、LAN Setup、Wireless Setup、Time Server
Setup and Password Setup.
Please click on “Next” right side below, and go to the next page.
2.1.1 WAN Setup
Navi R122g supports 4 connection types to WAN.
2.1.1.1 WAN Type – Static IP
Choose Static IP Address if all WAN IP information is provided to you by your ISP.
R122g will not accept the IP address if it is not in this format, and the blanks of “IP
Address”, “Subnet Mask” and “Default Gateway” must be input.
Default settin
g
and has to be set.
Default settin
g
and has to be set.
Default setting and has to be set.
Default setting and has to be set.
See Setup 2.1.1.1
See Setup
2.1.1.2
See Setu
p
2.1.1.3
See Setup 2.1.1.4