User's Manual

http://www.sapido.com.tw/ User Manual v1.0.0
47
Enable MAC Clone
(Single Ethernet Client)
Clone the MAC address for ISP to identify.
Enable Universal Repeater
Mode (Acting as AP and
Client simultaneously)
Allow to equip with the wireless way conjunction upper level,
provide the bottom layer user link in wireless and wired way in the
meantime.
(The IP that bottom layer obtains is from upper level.) Please also
check Section 4.1.2.2
SSID of Extended Interface While linking the upper level device in wireless way, you can set
SSID to give the bottom layer user search.
Apply Change & Reset Click on Apply Change to save the setting date, or you may click
on Reset to clear all the input data.
* Under WiFi AP Mode, there are 2 options of Network type: Infrastructure or Ad hoc. Select
Infrastructure if connecting to a wireless router or access point. Select Ad hoc if connecting directly to
another wireless adapter.
4.1.3.1 Multiple APs
The BR485D can support several SSIDs (wireless LAN group). It can be used as if there
are multiple wireless LAN access points with one product. Each SSID could be set with
different data rate, WMM and access type.
Item Description
Enable Enable or disable the service.
Band Select the frequency.
SSID Enter the SSID
Data Rate Select the data transmission rate.
Access Enable this function can let clients use two access types:
a. LAN+WAN: the client can access to the Internet and access in the
router’s GUI.
b. WAN: the client can only access to the Internet.