User's Manual

http://www.sapido.com.tw/ User Manual v1.0.0

Chapter 4 Wireless Setup

4.1 Wireless Setup

There are two ways to setup wireless LAN with BR485D. You can use either way to setup

Wireless LAN.

4.1.1 Setup Wireless LAN by WPS button

You can setup wireless LAN easily by using the WPS button if both WLAN router and the

WLAN adapter (client) are WPS supported. Before starting the setup, please check the

things below:

λ Get ready for Internet connection with BR485D

λ The WLAN adapter is finished installation and plug in your computer/ laptop.

There are two ways to setup a wireless LAN between BR485D and your wireless adapter:

1. Setup with WPS button, if your wireless adapter has a physical WPS button.

(1) Press the WPS button from BR485D and wait for Wireless/WPS LED light changed

into orange.

(2) Press the WPS button from the adapter until the setup window shows up.

(3) Open a web browser to check the internet connection.

(4) Setup without WPS button if you wireless adapter has only virtual WPS function.

(5) Open Wireless adapter utility.

(6) Press the WPS button (A) from BR485D

and wait for Wireless/WPS LED light (B)

changed into orange.