User's Manual

http://www.sapido.com.tw/ User Manual v1.0.0

Item Description

IPSec Pass-through Internet Protocol Security (IPSec) is a suite of protocols used to

implement secure exchange of packets at the IP layer. To allow

IPSec tunnels to pass through the router, IPSec Pass-through is

enabled by default. To disable IPSec Pass-through , select Disable

PPTP Pass-through Point-to-Point Tunneling Protocol is the method used to enable

VPN sessions to a Windows NT 4.0 or 2000 server. To allow PPTP

tunnels to pass through the router, PPTP Pass-through is enabled

by default. To disable PPTP Pass-through, select Disable.

L2TP Pass-through To allow the L2TP network traffic to be forwarded to its destination

without the network address translation tasks.

Apply Changes & Reset &

Refresh

Please click on Apply Changes to save the setting data. Or you

may click on Reset to clear all the input data.

6.3.9 Language Setting

The BR485D provide 12 languages for Web GUI. You can select the language interface from

the dropdown list and by following steps.