User's Manual

http://www.sapido.com.tw/ User Manual v1.0.0
78
Time Zone Select Please select the time zone.
Enable NTP client update Please select to enable NTP client update or not.
Automatically Adjust
Daylight Saving
Please select to enable Automatically Adjust Daylight Saving or
not.
NTP Server Please select the NTP server from the pull-down list, or you can
enter the NTP server IP address manually.
Apply Changes & Reset &
Refresh
Please click on Apply Changes to save the setting data. Or you
may click on Reset to clear all the input data. Or you may click on
Refresh to update the system time on the screen.
6.3.7 UPnP Setting
Universal Plug and Play (UPnP) is a standard of networking protocols promulgated by the
UPnP Forum. The goals of UPnP are to allow devices to connect seamlessly and to simplify
the implementation of networks in the home (data sharing, communications, and
entertainment) and in corporate environments for simplified installation of computer
components. BR485D supports UPnP function, and can cooperate with other UPnP devices.
When you activate UPnP, please click My Network Places. Users will see an Internet
Gateway Device icon. By click the icon, users can enter the GUI of the router. If you do not
wish to use UPnP, you can disable it.
Enable/Disable UPnP: Select to enable or disable this function.
6.3.8 VPN Passthrough Setting
Virtual Private Networking (VPN) is typically used for work-related networking. For VPN
tunnels, the router supports IPSec, Pass-through, PPTP Pass-through, and L2TP
Pass-through.