User's Manual

http://www.sapido.com.tw/ User Manual v1.0.0
61
Item Description
Enable QoS Check “Enable QoS” to enable QoS function for the WAN port. You
also can uncheck “Enable QoS” to disable QoS function for the WAN
port.
Automatic uplink speed /
Manual Uplink Speed
Set the uplink speed by manual to assign the download or upload
bandwidth by the unit of Kbps or check the Automatic uplink speed.
Automatic downlink
speed / Manual Downlink
Speed
Set the downlink speed by manual to assign the download or upload
bandwidth by the unit of Kbps or check the Automatic downlink
speed.
QoS Rule Advance Setting:
Address Type Set QoS by IP Address or MAC address
Local IP Address
Set local IP Address if the address type is by IP Address
MAC Address
Set MAC Address if the address type is by MAC Address
Mode Select Guaranteed minimum bandwidth or Restricted maximum
bandwidth
Bandwidth Key in the bandwidth.
Comment Write your comment here.
Apply Changes & Reset Click on Apply Changes to save the setting data. Or you may click
on Reset to clear all the input data.
5.2.6 Denial of Service