User's Manual

1.5 WAN Network Plug and Play

 WAN Type auto-detection：

 When using Ethernet auto-connection:

¾ Auto-detection mode only applies on PPPoE, DHCP, PPTP and L2TP.

¾ Router will detect WAN type and load the settings from last time or display

corresponding page for user to input information.

¾ If there is no setting from user, the router will load the default settings.

If there is no setting from user, it will detect ISP and load corresponding settings.

1.6 Get Your IP Automatically & Manually

After 11N Broadband router connected with your computer, please make sure your IP is in the

automatic IP position or you adjust it manually in order to activate the Internet network from

home to Internet. If you don’t know how to enter the settings, please follow the steps as

below.

Step 1. Go to Start>Settings> Network Connections and then select Local Area

Connection.

Step 2. Click on Properties