User's Manual

Step 4-1. For getting IP automatically if you are one of the users under 11N Broadband

Router, please skip Use the following IP address and then select Obtain an IP address

automatically and Obtain DNS server address automatically and then click on OK button.

Step 4-2. For getting IP manually in order to specify a Virtual Server, such as Print Server,

FTP Server and so on, please skip Obtain an IP address automatically and then select Use

the following IP address. And the following default setting of 11N Broadband Router should

be noted:

y IP Address: 192.168.1.10 (as your Print Server for example)

y Subnet Mask: 255.255.255.0

y Default Gateway: 192.168.1.1

Note: If you configure your computer’s IP Address manually, it needs to be on the same network segment.

For example:

z IP Address: 192.168.1.xxx (xxx can be any number between 2 and 253, but it can’t be

repeated, we use 100 to be the example.)

z Subnet Mask: 255.255.255.0

z Gateway: 192.168.1.1 (this is the IP address of 11N Broadband Router in Router Mode)

z DNS: 192.168.1.1 (use 11N Broadband Router’s IP address or on your own choice)

Note: IP address and Default gateway cannot be the same.