User's Manual

Version 1.0.15

Note: 1. Before sliding the switch modes, please power-off the router firstly. Moreover, please stay over 10

seconds between power-off / power-on condition.

2. Switching the mode while power is on will make the router crush, and cause the hardware damage and

information lost.

4.3 WiFi AP Mode

As WiFi AP Mode, 11N Mini Broadband Router will be a bridge and support a wireless LAN.

NAT function is disabled under WiFi AP mode. The 11N Mini Broadband Router connects

the upper level device wirelessly and gets its assigned IP address. If not, the 11N Mini

Broadband Router will use the default IP or assigned by the user.

4.3.1 Switch to WiFi AP Mode

Switch to WiFi AP mode and plug in power.

Note: 1. Before sliding the switch modes, please power-off the router firstly. Moreover, please stay over 10

seconds between power-off / power-on condition.

2. Switching the mode while power is on will make the router crush, and cause the hardware damage and

information lost.