User Manual

Version 1.0.15

4.3 WiFi AP Mode

As WiFi AP Mode, 11N Mini Router will be a bridge and support a wireless LAN. NAT function

is disabled under WiFi AP mode. The 11N Mini Router connects the upper level device

wirelessly and gets its assigned IP address. If not, the 11N Mini Router will use the default IP

or assigned by the user.

4.3.1 Switch to WiFi AP Mode

Switch to WiFi AP mode and plug in power.

Note: 1. Before sliding the switch modes, please power-off the router firstly. Moreover, please stay over 5 seconds

between power-off / power-on condition.

2. Switching the mode while power is on will make the router crush, and cause the hardware damage and

information lost.