User Manual

Version 1.0.15

The default values for User Name and Password are admin (all in lowercase letters). Click

4.2 AP Mode

Under AP Mode, the 11N Mini Router supports 2 LAN ports as Bridge, and user can connect

to this Router via LAN port and provide the lower level wired or wireless internet connections.

NAT function is disabled under AP mode. The 11N Mini Router connects the upper level

device only through the Ethernet port and gets its assigned IP address. If not, the 11N Mini

Router will use the default IP or assigned by the user.

4.2.1 Switch to AP Mode

Switch to AP mode and plug in power.

Note: 1. Before sliding the switch modes, please power-off the router firstly. Moreover, please stay over 5 seconds

between power-off / power-on condition.

2. Switching the mode while power is on will make the router crush, and cause the hardware damage and

information lost.