User's Manual

289
User
’
s Manual V1.0
 Location: Please adjust the location and direction of your router.
 Channel: Change to another channel can avoid the interruption.
 Interruption: It might be interrupted by other devices. You can turn off
other devices first, and then reconnect. Any noisy device should be avoided
or relocated.
 Shielding Effect: The speed might be impeded by your environment between
wireless clients. Close to station is the only way to improve the speed.
4. Q: When I use the wireless router, there are some applications not
functioned properly.
A: You may activate DMZ service to run these applications, but be aware of
following issues.
 It may cause security problem if the firewall is disabled.
 Only one computer can use DMZ service.
5. Q: I can’t make a connection with the wireless router.
A: Check out the following:
 Check out the installation of router, the connection of local area network,
and the power.
 Make sure your computer is located on the same network class with
wireless router.
 If your computer is set to Obtain an IP Address automatically（DHCP
client）, please reboot it.
 If your computer uses the static IP address, please confirm the IP address
is located between 192.168.1.129 ~ 192.168.1.253. The default IP
address for wireless router is 192.168.1.254. The Subnet Mask is
255.255.255.0.
6. Q: The wireless interface of WinXP is not compatible with Server
Router’s WEP interface.