User's Manual

287
User
’
s Manual V1.0
1. Please check the power of Cable/XDSL modem.
2. Please check the connection of Cable/XDSL modem.
3. Check the LED status of WAN to make sure Cable/XDSL modem is
connecting with Server Router.
If your ISP requires username and password, please make sure they are
correct. The ISP will use there to identify users if the network service uses
DHCP without authentication.
5. Q: I can ping the computer outside the local area network, but I can’t
use the Internet.
A: Check the DNS settings on your computer. If your computer is the client of
DHCP, please remove any DNS setting. Let the Server Router assign DNS
setting to clients.
6. Q: The Server Router can’t save settings after I click the Apply button.
A: The Server Router should save the settings immediately after the Apply
button is clicked. If the situation occurs, we suggest you to reboot the
machine.
9.6 Wireless Network
1. Q: After the inspection, I still can not use wireless connection with my
notebook.
A: Sometimes the wireless network settings are very complicated. Especial
when you manage the encryption system of different products. Any
different password settings may cause the disconnection with other clients.
Let’s see some possible situations.
For the first-time users, make sure your router and workstation using the
same SSID name. When a wireless device is trying to connect to wireless
network, SSID is an access password. SSID can be used for distinguish
between different areas of wireless network. So when all the base stations
and equipments trying to connect to a specific area of the wireless network,
they must use the same SSID name; and workstations are not allowed to