User's Manual

284
User
’
s Manual V1.0
9.3 IP Address
1. Q: What is the default IP address of the Server Router?
A: The default IP address is 192.168.1.1, and the Subnet mask is
255.255.255.0。
2. Q: I don’t know my WAN IP address?
A: There are two ways to find it.
1: Please check with your ISP.
2: Please select Log & Status on the left menu of the Server Router, and
then select Network Configuration, you will see the WAN IP
address.
3. Q: How do I know that I have static IP address on WAN?
A: Please check with your ISP, or select Network Configuration to check out.
4. Q: Can I use personal domain name on this router? Or should I use the
IP address which provided by router?
A: Yes, you can use your own domain name on Server Router.
9.4 Operating System Settings
1. Q: My computer can’t connect to the Internet after installed the
Server Router, why?
A: Please follow the instructions：（Windows 2000 & XP）Start > Settings >
Network Connections > double click Local Area Connections > select
Properties > double click Internet Protocol（TCP/IP）> select obtain
an IP address automatically > click OK. Then open your browser to try
again. If you still can’t connect to the login page, please test the following
methods：
 Make sure there is no one using the same IP address.
 Turn off the computer, then ping the IP was given to that computer, make
sure there is no other device responding.