User's Manual

283
User
’
s Manual V1.0
2. Q: My network speed is very slow, why?
A: Please make sure your network cable is less than 100m. Or you can install
a bridge between your router and computer to keep the quality of signal.
You can also try to…:
 Please make sure the network traffic is less than 37% of bandwidth.
 Please check to see there are no more than 10 broadcast messages in
network traffic.
 Please check the network topology and settings.
9.2 LED lights
1. Q: The Power Indicator of my Server Router is not on, why？
A: Please check the power supply first.
2. Q: Even I confirmed the IP address and Local Network are good, I still
can’t connect to the login page of Server Router？
A: You could try to reset the Server Router back to factory default settings.
Please hold the Reset button over 5 seconds. The STATUS light will be off,
and then every LED indicator will be on again. It means the Server Router
is back to factory default settings.
3. Q: My Server Router will shut down automatically without any warning,
why?
A: Please check the power adapter connection again, then check STATUS
indicator. If the indicator is still not on, the memory inside the router might
be damaged, please contact the sales.