User's Manual

ETOP 224
User’s Manual V1.0
header to create the PPDU. It has 2 options: Long Preamble and Short
Preamble.
5. IAPP
Inter-Access Point Protocol is a recommendation that describes an optional
extension to IEEE 802.11 that provides wireless access-point communications
among multivendor systems.
6. Protection
Please select to enable wireless protection or not.
7. Aggregation
Enable this function will combine several packets to one and transmit it. It can
reduce the problem when mass packets are transmitting.
8. Short GI
Users can get better wireless transmission efficiency when they enable this
function.
9. RF Output Power
Users can adjust RF output power to get the best wireless network
environment. Users can choose from 100%, 70%, 50%, 35%, and 15%.
10. Apply Changes & Reset
Click on Apply Changes to save the setting data. Or you may click on Reset
to clear all the input data.
7.2.3 Wireless Site Survey
This function provides users to search existing wireless APs or wireless base
stations from ISP. You can connect to a wireless AP manually in WiFi AP mode. The
designed AP will appear on SSID column in Wireless Basic Setup page.
Please click on Refresh to refresh the list. Click Connect after select an existing
AP to connect.