Specifications

1.5 TORQUE VALUES
For this ATV serial; the torque values of frame and engine are the same, just like the picture below;
ENGINE
● Cylinder head nut
28-30 N.m (20.7-22.1 lbf.ft)
● Spark plug
12-19 N.m (8.9-14.0 lbf.ft)
● Cylinder head bolt
20-30 N.m (14.8-22.1 lbf.ft)
● Alternator bolt
8-12 N.m (5.9- 8.9 lbf.ft)
FRAME
● Handlebar upper holder bolt
24-30 N.m (17.7-22.1 lbf.ft)
● Steering shaft nut
50-60 N.m (36.9-44.3 lbf.ft)
● Steering shaft bushing holder nut
24-30 N.m (17.7-22.1 lbf.ft)
● Wheel rim bolt
18-25 N.m (13.3-18.4 lbf.ft)
● Tie rod lock nut
35-43 N.m (25.8-31.7 lbf.ft)
● King pin nut
30-40 N.m (22.1-29.5 lbf.ft)
● Handlebar lower holder nut
40-48 N.m (29.5-35.4 lbf.ft)
● Front wheel bolt
24-30 N.m (17.7-22.1 lbf.ft)
● Front axle nut
55-65 N.m (40.6-47.9 lbf.ft)
● Front brake arm nut
4-7 N.m (3.0- 5.2 lbf.ft)
● Rear brake arm nut
7-12 N.m (5.2- 8.9 lbf.ft)
● Rear axle nut
60-80 N.m (44.3-59.0 lbf.ft)
● Rear wheel bolt
24-30 N.m (17.7-22.1 lbf.ft)
● Exhaust muffler mounting bolt
30-35 N.m (22.1-25.8 lbf.ft)
● Engine hanger bolt
24-30 N.m (17.7-22.1 lbf.ft)