Specifications

INSTALL BRAKE PANAL
Apply grease to the brake cam and anchor pin
and install the cam in the brake panel.
Soak the felt seal in the engine oil and install
the seal on the brake cam.
Install the brake arm on the cam by aligning
the punch mark and the groove on the cam.
Tighten the brake arm bolt and nut.
Torque: 4-7 N.m
Install the return spring.
Install the brake panel on the knuckle.
Connect the brake cable to the brake arm.
Install the brake arm cover.
Tighten the screws securely.
Position the brake shoes in their original locations
and install the brake shoe spring.
Install the brake drum and front wheel.
Install the castle nut and cotter pin.