Specifications

SHIFT MECH.
Remove mission side cover and other parts. Check shift gear for wear or damage.
Measure open width of shift spring as fig-2.
If open width greater than 5mm, it must be replaced.
Service limits: 5 mm
fig-2
SHIFT MOTOR
Disassembly mission side cover, parts of shift mechanism and mission cover.
Check shift motor whether the action is normal as follow dat.
Get seal and bearing after disassembly shift motor of
mission cover.
Check seal and bearing for wear or fatigue.
Replace it if necessary.
Seal Bearing
Brush
Voltage Current Torque rpm
UNLOAD 12V 0.8A MAX. -- 2300
LOADED 12V 2A 0.5 kg-m 1100
Shift Sp ri ng
Shi
f
t Gea
r