Pocket PC User Manual
Welcome Congratulations on purchasing a Pocket PC. Due to the size and capabilities of this Pocket PC, you can keep your most important business and personal information up-to-date and close at hand. Microsoft ActiveSync increases the power of your Pocket PC by allowing you to synchronize the information on your desktop or laptop computer with your Pocket PC. Picture yourself in the following situations: While walking with a colleague, your Pocket PC device rings.
A Calendar reminder alerts you that it is time to catch the bus. You grab your Pocket PC device and catch the bus just in time. Because ActiveSync keeps the information on your Pocket PC up-to-date, you leisurely review your task list, make notes about the new books and CDs you want to buy, and read and respond to e-mail messages. When you get back to the office, ActiveSync transfers any task changes you made, your notes, and your e-mail message responses to your desktop computer.
Safety Instructions ♥ ♥ Please Read Before Proceeding. This product is not charged when shipped from the factory. When you use this product the first time, we recommend that you install the battery as illustrated and fully charge it for about 8 hours before use. ♥ Before you install the SIM card, make sure that tap the ALL OFF Button in Wireless Manager to turn off your Pocket PC’s mobile phone, Bluetooth, and wireless LAN functions.
Where to Find Information For information on: See this source: Programs on your Pocket PC This User’s Guide and Pocket PC Help. To view Help, tap and then Help. Additional programs that can The Pocket PC Getting Started CD. be installed on the Pocket PC Connecting to and Check the user’s guide that comes with this synchronizing with a desktop product or look for the online help relevant computer to ActiveSync on the desktop PC or the Pocket PC. Up-to-date information on http://www.microsoft.
User Manual WELCOME.................................................................................1 SAFETY INSTRUCTIONS .............................................................3 WHERE TO FIND INFORMATION ................................................4 1 Getting Started / ......................................................................1-1 PACKAGE CONTENT..................................................................1-1 EXTERNAL VIEWS.........................................................
Programs .........................................................................2-6 System Application Programs..........................................2-8 M-DESK ....................................................................................2-10 ENTER INFORMATION ON YOUR POCKET PC............................2-13 Enter Text Using the Input Panel ....................................2-13 Type with the Soft Keyboard...................................2-15 Use Letter Recognizer ..........................
Call from Speed Dial .......................................................3-9 Call from the Call History ...............................................3-10 CUSTOMIZE YOUR PHONE ........................................................3-11 Add Ring Tone .................................................................3-12 PHONE APPLICATION PROGRAMS .............................................3-13 SIM Manager ...................................................................3-13 Standard Display..........
POP-UP MENUS ..........................................................................4-11 REDEFINE HOT KEYS ................................................................4-12 5 Microsoft ActiveSync /............................................................5-1 INSTALLING AND USING ACTIVESYNC .....................................5-2 USB SYNCHRONIZATION ..........................................................5-3 SYNCHRONIZING USING BLUETOOTH .......................................
Configure Your Wireless Network (Reference for a normal network setup)..................................................................7-4 Configure Your Wireless Network (Reference for Proxy setup) .........................................................................................7-7 8 Sending and Receiving Messages / ........................................8-1 E-MAILS AND SMS MESSAGES .................................................8-1 Synchronizing E-mail Messages ...............................
Speed Shooting Using the Hardware Hotkeys.................9-7 MULTIMEDIA MANAGER ..........................................................9-8 Preview Multimedia Information.....................................9-8 Slide Show Function ........................................................9-9 Multimedia Manager Tools .............................................9-10 IMAGE MAKER..........................................................................9-11 IMAGE WIZARD ........................................
Using Internet Explore ....................................................10-24 Browse the Internet..................................................10-25 View Mobile Favorites and Channels .....................10-26 The Mobile Favorites Folder...........................................10-26 Favorite Links ..................................................................10-27 Synchronize Mobile Favorites .........................................10-27 Create a Mobile Favorite ..............................
12 Voice Commander /.................................................................12-1 STARTING VOICE COMMANDER ...............................................12-2 VOICE COMMAND FORMAT ......................................................12-3 VOICE COMMANDER SETTINGS ................................................12-5 Contacts Settings Page ....................................................12-5 Application Settings Page................................................12-8 Music Settings Page..........
1 Getting Started / Package Content Pocket PC, stylus, Battery, Getting Started CD, User Guide, AC adapter, USB cable, charger or USB cradle, travel charger, headset and leather case.
External Views 8 6 7 9 10 20 21 1 22 2 11 3 4 12 5 23 13 14 16 24 15 17 1 3 5 7 Camcorder Voice Commander Earphone and microphone jack Power button 18 19 2 4 6 8 Volume control key Reset button SD/MMC card slot WLAN LED indicator (Orange) Bluetooth LED indicator (Blue) 9 Cell Phone speaker 10 Power/Cell phone LED indicator Speed dial/Contacts hot key Touch screen 11 12 M-Desk/Today screen hot key 14 Send button 13 End button 15 Navigation button.
Hardware Hotkey Functions Hardware Button Short Press (Press once and release) Long Press (Press for a few seconds and release) Camcorder Video recorder Zoom in/out during camera mode -- Adjust volume Voice Commander Connect to Notes Reset Button -- Power Button = open or close screen -Power Button + Reset Button = cold -boot -Frequently Dialed → Index Dial → Contacts M-Desk → Today screen -- Hang up during call Disconnect during GPRS Turn off phone i
Rear Side 1 Insert the SIM card into the SIM 2 Back cover card slot with its golden contacts facing down. Follow the picture indicated on the Pocket PC. 3 Main battery 4 Follow the direction in the illustration to install the main battery. 5 Main battery lock 6 Fixing lock button for the back cover Installing the SIM Card 1 2 3 Installing the Battery 4 Unlock 5 6 Caution! The backup battery is charged through the main battery power.
Using the Pocket PC for the First Time Charging Power and Power Supply USB port: Use the USB cable included with the product package to connect the Pocket PC to the desktop computer through this port. AC adapter power jack. 1. To remove the back cover, press the fixing lock button on the rear side of the Pocket PC. Unlock the main battery lock and remove the main battery.
3. Connect the AC adapter plug to any household power outlet, and then connect the round plug from the AC adapter to the power connector. The Pocket PC starts to charge automatically. 4. Cold Boot: Press and hold the “Power Button” with one hand, and use the stylus tip to press the “Reset Button” with the other hand. Release the “Power Button” and the “Reset Button” at the same time. Wait for the Pocket PC to restart and follow the instructions on the screen to complete screen alignment. 5.
Travel Charger Connect the AC adapter plug to any household power outlet. Connect the round plug from the AC adapter to the power jack on the USB cable. Connect the flat end on the USB cable to the charger or USB cradle connector on the bottom of the Pocket PC. The Pocket PC starts to charge automatically. If necessary, connect the other end of the USB cable to the USB port on the desktop computer.
Re-installation or Replacing the Battery If the phone or GPRS connection function is already activated, deactivate it first and run the next step; otherwise abnormal disconnection will occur. 1. Press the fixing lock button on the rear side of the Pocket PC and remove the back cover. 2. Slide the main battery lock down to open the main battery lock. Now you can easily remove the battery. 3. Replace the main battery and lock it properly.
Power On and Off Power Button Sleep Mode 1. Press the “Power Button” at the top of the Pocket PC to enter the Sleep mode. At this time, the screen is turned off and all peripheral devices enter the power-saving mode. But if the phone is turned on, it is still in the call waiting mode. 2. To turn on the screen later, just press the “Power Button.” 3. Tap , Settings, the System tab, Power and then the Advanced tab to set the device to turn off automatically after waiting for a certain time period.
Turn on the Screen This product is designed with a power-saving feature. If the screen is turned off, press the “Power Button” at the top of the Pocket PC to turn it on. If the screen is too dark and you cannot see clearly, set the proper brightness level for the backlight. Tap , Settings, the System tab, Backlight and then the Backlight Level tab. Using the Stylus to Touch the Screen Your Pocket PC is designed for graphics-based operation.
Restarting the Pocket PC Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen. For your consideration, factoring into your safety and convenience, please refer to the following instructions in order: 1. Reset Push in the “Reset Button” located to the side of Pocket PC with the tip of the stylus. 2. Default Settings , If the touch screen is functional, please tap procedures Programs, Utilities, and then Default Settings. 3.
Reset Reset method: Push in the “Reset Button” located to the side of Pocket PC with the tip of the stylus. Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen. Result: In a moment, when Pocket PC automatically completes the system startup process, the last display will be the Today screen.
Default Settings Tap , Programs, Utilities, and then Default Settings. 1. If this application is inadvertently to accessed, please select the the upper right of the screen to exit, the system will not be affected. 2. If you are certain that you wish to perform this action, please select the data input block on the right, and enter the authorized code in the block to the left. Then tap the OK button.
Clean Boot Cold boot method: Hold the “Power Button” on top of the Pocket PC with one hand while holding the stylus tip to push in the “Reset Button” with the other. Simultaneously release both the “Power Button” and “Reset Button”. Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no response, or if the screen is frozen.
Perform cold boot and hold the End Button . The system will display a two question inquiry screen. Please refer to the following instructions before careful consideration. 1. Erase all data and load default? (The default is “No.” If Yes or No was not selected, after a few seconds the system will automatically execute the default No.) If you long press for a few seconds to select “Yes,” then the system will erase all data and load default.
1-16
2 Using the Pocket PC / Start Screen Tap , Settings, the System tab, and then Screen. The first time you use or cold boot the pocket PC, the system will ask you to align the screen. Kindly continue to tap the center of each cross (+) that appears and follow the screen instructions to complete the operation. If you feel that the position is not quite accurate while tapping on the screen, you follow the help for this section to align the screen again.
The following steps will bring you into the touch screen calibration mode. These steps provide a faster and more efficacious way to enter the touch screen calibration mode. And they also provide a method of getting into Screen program for when the touch screen dislocation is so severe that you completely cannot select or do anything using the stylus. 1. Simultaneously press the on the bottom-left of the Pocket PC and the round execution button in the center of the navigation pad. 2.
Today Screen When you turn on your Pocket PC for the first time each day (or after 4 hours of inactivity), you will see the “Today screen”. You can also display it and then Today. On the “Today screen”, you can see at a by tapping glance the important information for the day. Start. Tap to switch to a program. Tap to enable or disable the GPRS connection feature. Antenna icon. Tap to turn the phone on or off. Speaker icon. For adjusting volume. Time.
The following table lists the icons that you may see on the Navigation Bar or the Command Bar. Kindly refer to the “Meaning” column for explanation or tap on the icon to access the instant message. Icon Meaning (Located on the Navigation Bar at the top of the screen) Speaker is on Speaker is off Main battery is charging. Main battery power is low. Main battery power is very low. Main battery is fully charged. Backup battery power is low. Notify you that you have one or more MSN instant messages.
Icon Meaning (Located on the Command Bar at the bottom of the screen) General Mode. Set the scenario suitable for each environment. Meeting Mode. Set the scenario suitable for each environment. Outdoor Mode. Set the scenario suitable for each environment. Silent Mode. Set the scenario suitable for each environment.
Programs You can switch from one program to another by selecting it from the menu. (You can customize which programs you see on this menu. For information, see “Adjusting Settings” section.) To access some programs, you’ll need to tap Icon , Programs, and then the program name.
Icon Programs Internet Explorer Description Browse Web and WAP sites, and download new programs and files from the Internet. Pocket MSN MSN related programs. For example, send and receive instant messages with your MSN Messenger contacts. Word Mobile Create new documents or view and edit Word documents created on your desktop computer. Excel Mobile Create new workbooks or view and edit Excel workbooks created on your desktop computer.
System Application Programs , Settings, the Personal tab Program Description Buttons Set the hot key for Pocket PC hardware button. Input Set the details about the input method. Menus Set the items displaying on the MSN Options Set the details about Pocket MSN. Owner Information Input owner information. Password Set the access rights and password of Pocket PC. Phone Set the details about the phone. Sounds & Set the volume and notification method. Start menu.
, Settings, the System tab Program About Backlight Certificates Clock & Alarms Memory Microphone Power Regional Settings Remove Programs Screen System Information Description Display the important information about the Pocket PC. Set the details about the backlight and brightness. For network identification to prevent unauthorized access. Set the time and alarms. View the memory usage, and the list of running programs, etc. Set the microphone volume.
M-Desk Tap , Programs, Utilities, and then M-Desk. You can categorize programs or even change the background picture on the panel according to your personal preferences. Categorizing, renaming, deleting or editing the text color of program names under M-Desk will not affect the default setting of the Pocket PC. Here is the description of the hot keys: on the lower part of the Pocket PC to switch 1. Press the hot key between the M-Desk and the Today screen. as the launch key for 2.
System category screen This category already has these programs that are automatically selected by the system which you cannot move or delete. All relevant information is updated automatically. If no SD/MMC card is installed, its icon changes to gray and will be marked with a red X. Change screen orientation. Categories Setup screen Exit the Categories Setup screen. Tap Phone, PDA or other tabs to select preferred programs. A maximum of 12 programs are allowed for each category.
Choose Style screen Exit Choose Style screen. Viewing area. View the previous or next picture. Tap Options and then Classify Config to enter the Categories Setup screen.
Enter Information on Your Pocket PC You have several options for entering new information: 1. Use the input panel to enter typed text, either by using the soft keyboard or other input method. 2. Write directly on the screen. 3. Draw pictures on the screen. 4. Speak into your Pocket PC microphone to record a message. 5. Use Microsoft ActiveSync to synchronize or copy information from your desktop computer to your Pocket PC. For more information on ActiveSync, see ActiveSync Help on your desktop computer.
To show or hide the input panel, tap the Input Panel button. Tap the arrow next to the Input Panel button to see your choices. Select an input method. Tap to see your choices. Input Panel button. When you use the input panel, your Pocket PC anticipates the word you are typing or writing and displays it above the input panel. When you tap the displayed word, it is inserted into your text at the insertion point. The more you use your Pocket PC, the more words it learns to anticipate.
Type with the Soft Keyboard 1. Tap the arrow next to the Input Panel button and then Keyboard. 2. On the soft keyboard that is displayed, tap the keys with your stylus. Use Letter Recognizer With Letter Recognizer you can write letters using the stylus just as you would on paper. 1. Tap the arrow next to the Input Panel button and then Letter Recognizer. 2. Write a letter in the box. When you write a letter, it is converted to typed text that appears on the screen.
Use Transcriber With Transcriber you can write anywhere on the screen using the stylus just as you would on paper. Unlike Letter Recognizer and Block Recognizer, you can write a sentence or more of information. Then, pause and let Transcriber change the written characters to typed characters. 1. Tap the arrow next to the Input Panel button and then Transcriber. 2. Write anywhere on the screen.
Write on the Screen In any program that accepts writing, such as the Notes program, and in the Notes tab in Calendar, Contacts, and Tasks, you can use your stylus to write directly on the screen. Write the way you do on paper. You can edit and format what you’ve written and convert the information to text at a later time. Write on the Screen Tap Menu and then check Draw to switch to writing mode. This action displays lines on the screen to help you write. Tap Menu and then check Draw.
Select Writing If you want to edit or format writing, you must select it first. 1. Tap and hold the stylus next to the text you want to select until the insertion point appears. 2. Without lifting, drag the stylus across the text you want to select. If you accidentally write on the screen, tap Menu, then Undo and try again. You can also select text by tapping Menu and then Draw to deselect it and then dragging the stylus across the screen.
If the conversion is incorrect, you can select different words from a list of alternates or return to the original writing. To do so, tap and hold the incorrect word (tap one word at a time). On the pop-up menu, tap Alternates. A menu with a list of alternate words appears. Tap the word you want to use, or tap the writing at the top of the menu to return to the original writing. Tap to return to your original writing. Or, tap the word you want to use. Tips for getting good recognition: 1.
Draw on the Screen You can draw on the screen in the same way that you write on the screen. The difference between writing and drawing on the screen is how you select items and how they can be edited. For example, selected drawings can be resized, while writing cannot. Create a Drawing Cross three ruled lines on your first stroke. A drawing box appears. Subsequent strokes in or touching the drawing box become part of the drawing. Drawings that do not cross three ruled lines will be treated as writing.
Select a Drawing If you want to edit or format a drawing, you must select it first. Tap and hold the stylus on the drawing until the selection handle appears. To select multiple drawings, tapping Menu and then Draw to deselect it and then drag to select the drawings you want. You can cut, copy, and paste selected drawings by tapping and holding the selected drawing and then tapping an editing command on the pop-up menu, or by tapping the command on the Menu menu.
Create a Recording 1. Hold your Pocket PC’s microphone near your mouth or other source of sound. 2. Press and hold the Record hardware button on your Pocket PC until you hear a beep. 3. While holding down the Record button, make your recording. 4. To stop recording, release the Record button. Two beeps will sound. The new recording appears in the note list or as an embedded icon. You can also make a recording by tapping the Record button on the Recording toolbar.
Use My Text When using Messaging or MSN Messenger, use My Text to quickly insert preset or frequently used messages into the text entry area. To insert a message, tap My Text and tap a message. Tap to select a prewritten message. You can add text after inserting a My Text message before sending it. To edit a My Text message, select Edit My Text Messages. Select the message you wish to edit and make desired changes.
Voice Commander By default, the system sets the button on the side of the Pocket PC as the “Voice Commander Button.” Press this button to launch the Voice Commander. For details on how to use this function, please refer to the Voice Commander section.
3 Us i n g the Phone / The Phone feature on the Pocket PC allows you to perform the following tasks: Make and receive calls. Quickly make calls or listen to voice mail without entering phone numbers using Contacts, Speed Dial, or your Call Log. Check the Call Log to see who has called, whom you have called, add a new number to Contacts, and access notes taken while you were on a call. Receive calls and easily take notes during the call. Send SMS messages. Customize how your phone rings.
Installing and Removing the SIM Card 1 Insert the SIM card into the SIM 2 Back cover card slot with its golden contacts facing down. Follow the picture indicated on the Pocket PC. 3 Main battery 4 Follow the direction in the picture to install the main battery.
1. Tap the ALL OFF Button in Wireless Manager to turn off your Pocket PC’s mobile phone, Bluetooth, and wireless LAN functions. 2. Press the “Power Button” on the top of the Pocket PC to turn off the screen. 3. To remove the back cover, press the fixing lock button on the rear side of the Pocket PC. 4. Slide it down to unlock the main battery lock and then remove the main battery. 5. Insert the SIM card into the SIM card slot with the golden contacts facing down.
Using the Phone Microphone Phone Speaker Earphone Phone Microphone (Bottom of Pocket PC) Combination Operation Method Hold the Hold the Pocket Pocket PC PC and position manually the speaker close for calls to your ear and Install the external headset 3-4 Answer or End a Call Press Send Button or End Button on the lower part of the Pocket PC.
Adjusting the Phone Volume 3. Vibration mode: The speaker icon 4. Mute mode: The speaker icon Tap on the top and adjust all . programs’ sound functions under Adjust the phone sound volume under . 1. When there is no call, you can push the volume control key on the side of the Pocket PC or use the stylus to tap the speaker icon and then to adjust Tap the ring volume of the incoming call. 2. Push the volume control key on the side of the Pocket PC or tap to adjust the phone and then volume.
Turning the Phone On or Off and Making Calls Adjust earphone volume Rear side: The SIM card is located below the battery. Send Button End Button 1. Open the Pocket PC back cover and remove the main battery. 2. Install the SIM card properly. As shown in the direction on the Pocket PC, pay attention to the position of the cut corner on the SIM card when you insert it into the card slot. The golden contacts of the SIM card should face down. 3.
Toolbar Provides the functional tools. 1. Contacts Button: Link to Contacts. 2. Menu Button Save to Contacts: Save the dialed phone number to Contacts. Create Note: While making a call, you can enter Notes to use the panel as the memo pad for writing down notes, pictures or recording. Options: Change the phone setup such as ring tone, vibration mode, PIN code, etc. 3. Keypad Button: Tap to return to the keypad. 4. Speaker on Button: While answering a call, tap to enable the speakerphone.
The following table shows the icons that you may see on the Navigation Bar on the top of the screen. Signal Indicator Description SIM card unavailable. The phone is turned off. To turn it on, tap this icon. Network is searching or unavailable. Phone connection unavailable or network error. To turn it off, tap this icon. The phone is turned on and signal reception is normal. To turn it off, tap this icon. Active call. To switch back from other programs, tap this icon.
Call from Contacts Phone numbers entered in Contacts can be used to quickly locate phone numbers and make calls. 1. In the contact list, tap and hold the contact to display a pop-up menu. 2. Tap Call Mobile or Call Work on the pop-up menu. 3. Tap a contact to display the details. Call from Speed Dial On the Phone screen, tap Speed Dial Button to enter the following screen. Tap and hold on a certain contact. The pop-up menu provides the Delete and Edit options for phone setup.
Call from the Call History Tap Call History Button on the Phone screen to enter the following screen. Tap Menu and then Filter to list the categories. To search, tap By Caller and follow the screen instructions to complete the operation. Tap this icon to redial this number immediately. Tap and hold the phone number area and tap the option you need on the pop-up menu. For example, tap Call to redial this number, tap Save to Contacts to add this number to the Phonebook.
Customize Your Phone Tap Menu, Options, and then the Phone, Services, Network, Appreciation software or Others tabs to modify the relevant service setup. Note that the setup values you can change here depend on the services provided by your telephone company. Tap the Appreciation software tab. Make sure that you have checked “ZOOM SMS.” When you receive an SMS, a large mail icon will appear on the upper right of the Today screen, and you can open your newly received message by tapping on this icon.
Tap Menu, Options, and then the Phone tab. You can set the ring type as ring, vibration or mute. If you want to use a customized ring tone file, use the ActiveSync program on your desktop computer to copy the .wav ring tone file to the /Windows/Rings folder on the Pocket PC. You can then select this ring tone from the Ring tone list. Set the key sound for dialing. You can set a PIN (Personal Identity Number) to block unauthorized access to your phone.
Phone Application Programs Caution! Before you can use the functions described in the Phone Group. Make sure that the SIM card is properly installed in your Pocket PC and the Phone is already turned on. SIM Manager If your Pocket PC does not include this function, it means it is not supported and you can skip this chapter. Tap , Programs, Phone, and then SIM Manager. Standard Display SIM Manager manages the SIM Phonebook and duplicates the Phonebook entries. SIM Phonebook Name or Pos.
The following are the shared functions for standard screen or fullscreen display: Standard Button: Provides Standard, SIM, Contacts three switching modes. Menu Button: Provides the appropriate function table. SMS Management: Enter the SMS management screen. New SIM Contact: Add a new phonebook entry to the SIM card. Refresh: Tap to refresh the displayed contacts and SIM card information, after the Contacts are updated.
Copy Phonebook Information The function descriptions of this section are for standard screen and fullscreen display. Copying phonebook information between the SIM card and Contacts is either by “select one, select multiple, or select all” methods. For precise management of your phonebook that can be conveniently performed. Select all Tap on the □ in the title to select all. Tap on the □ in front of a phonebook data entry to select this singl entry.
SMS Management Tap Menu and then SMS Management to enter the SMS management screen and to display the original SMS contents on the SIM card. Double tap the number in the Pos. column to view the corresponding SMS contents. Tap the SMS you want to delete. When it is highlighted, tap Del selected SMS Button to delete this message from the SIM card. Return to the SIM Manager screen. SIM Tool Kit Tap , Programs, Phone, and then SIM Tool Kit. This screen is for reference only.
SMS Sender Tap Tap , Programs, Phone, and then SMS Sender. , Messaging, and then New. Enter the composing SMS screen in Messaging. “Text Messages” means you are editing SMS. Input the mobile phone number. Input the messages you want to send. Tap Menu and then My Text to select canned messages or to edit your Text Messages. Tap to send SMS message.
Speed Dial Tap , Programs, Phone, and then Speed Dial. Hot Key Switch Press the hot key on the lower part of the Pocket PC to switch between these functions: Frequently Dial → Index Dial → Contacts. Figure on the left is the Index Dial screen. Tap the box according to the functions provided by the system. View Button: to switch between these functions: Frequently Dial → Index Dial. Tools Button: Provides the relevant menu.
Frequently Dialed Screen Frequently Dial screen Tap View Button or press the hot key on the lower part of the Pocket PC to switch to the Frequently Dial screen as shown on the left. Tap any phone entry box to speed dial. Tap and hold the box, then select appropriate command from the pop-up menu. Sort according to the number of calls in descending order. The upper left corner has the most number of calls while the lower right corner has the least number.
Index Dial Index Dial screen Tap View Button or press the hot key on the lower part of the Pocket PC to switch to the Index Dial screen as shown on the left. Tap on any letters. The content displayed are the data created in Contacts. If you did not create any data in Contacts, the screen is blank. The letter “F” appears on the upper left side of the screen (see left). This indicates that this page contains all address data that starts with “F”.
Call Filter Tap , Programs, Phone, and then Call Filter. Tap Add New List Button to add a new Block List. Tap and hold an entry in the list. Select from the pop-up menu to manage the list according to your needs. Tap Add New List to add a new Allow List. ～ Tap and hold any entry in the list to display the pop-up menu. Add New List Button Call History Button: Blocked call records.
Tap Add New List Button in the Call Filter screen to enter the screen shown on the left. Input name and telephone number. Add to Block List or Allow List. OK Button Cancel Button Tap and hold a contact in the Contacts screen. Select Add to Call Filter from the pop-up menu to add a new entry to the Block List. Tap Options Button in the Call Filter screen to enter the screen shown on the left. Call tab: Set to accept or reject call. History tab: Set the time for keeping the record.
Tap the icon or on the lower right of the Today screen to display the Call Filter Status window. Display Call Filter setting status. Tap to hide the Call Filter Status window.
3-24
4 Customize Your Pocket PC / You can adjust the Pocket PC settings according to your personal preferences and install other programs. Adjusting Settings To see available options, tap , Settings, then the Personal or System tab located at the bottom of the screen. The following utilities allow you to adjust the settings based on your personal work style.
Notifications Your Pocket PC reminds you in a variety of ways when you have something to do. For example, if you’ve set up an appointment in Calendar, a task with a due date in Tasks, or an alarm in Clock & Alarms, you’ll be notified in any of the following ways: A message box appears on the screen. A sound, which you can specify, is played. A light flashes on your Pocket PC. The Pocket PC vibrates. To choose reminder types and sounds for your Pocket PC, tap and then Settings.
Power Preference Settings Tap , Settings, the System tab, and then Power. View the power usage condition or perform the relevant power management settings. Power icon Check this item, so that when you accidentally press the hardware buttons on the Pocket PC, the Pocket PC will not exit the sleep mode. This will prevent unnecessary power consumption if a button is being pressed accidentally and not being discovered in time.
Backlight Tap , Settings, the System tab, and then Backlight. 1. Battery Power or External Power tab: Set the relevant backlight functions. 2. Backlight Level tab: Adjust the backlight level. Microphone Tap , Settings, the System tab, and then Microphone. 1. Use the slider to adjust volume of the phone mic, recording mic, or Bluetooth mic. 2. Default Button: Restore to default system settings.
Adjust Volume Push the volume control key on the side of the Pocket PC. Or use the stylus to tap the icon on the top of the screen to adjust all program sound functions under . Adjust the phone volume under . 1. Adjust volume: When set to On, use the stylus to tap and drag the slider up and down to adjust the volume. You can also push + or on the side of the Pocket PC. 2. Vibrate: Under Vibrate mode, the sound function of all programs will be replaced by vibration, including incoming call rings.
Scenarios Tap , Programs, Phone, and then Scenarios. You can tap any Scenarios icon in the Today screen to enter Scenarios. After selecting a mode, this will become the Scenarios icon you selected. Check this item to activate Scenarios. Select an applicable mode. Check this item to display the Scenarios mode icon in the Today screen. Details Button: Set the relevant options for this mode, such as volume, backlight, etc. Tap Details Button to enter the screen shown on the left.
Quick Link Tap , Settings, the Personal tab, Today, the Items tab, and then check Quick Link. Items tab: Enter the Today setting screen with Quick Link Options. Make sure that Quick Link is checked so that the Today screen can display this item. Options Button: Check and select Quick Link to highlight it, and then tap Options to enter its settings screen. Tap Move Up or Move Down to arrange the display order of these items in the Today screen.
Tap the Advanced tab to enter the screen shown on the left. Set to enable or disable the use of the Big Icon. Tap on arrowhead to select the number of lines for displaying Quick Link. The icons of the programs you checked in the General tab are displayed in this area. Tap an item in area, and use the arrows here to arrange order in which the item will be displayed in the Today screen. Description on the Today Screen Tap this icon to link to Quick Link settings screen.
Find and Organize Information The Search feature on your Pocket PC helps you quickly locate information. 1. Tap , Programs, and then Search. Input the text you want to find and then select the data type. Tap on Search to start the search. 2. To find information that occupies a larger space, select Larger than 64 KB for Type. Actually, you can use File Explorer to search for files and place these files into folders systematically. Just tap Explorer.
Navigation Bar and Command Bar The navigation bar is located at the top of the screen. It displays the active program and current time, and allows you to switch to programs and close screens. Use the command bar at the bottom of the screen to perform tasks in programs. The command bar includes menu names, buttons, and the Input Panel button. To create a new item in the current program, tap New. To see the name of a button, tap and hold the stylus on the button.
Pop-up menus With pop-up menus, you can quickly choose an action for an item. For example, you can use the pop-up menu in the contact list to quickly delete a contact, make a copy of a contact, or send an e-mail message to a contact. The actions in the pop-up menus vary from program to program. To access a pop-up menu, tap and hold the stylus on the item name that you want to perform the action on. When the menu appears, lift the stylus, and tap the action you want to perform.
Redefine Hot Keys Tap , Settings, the Personal tab, and then Buttons. These hot keys can be redefined as launch keys for frequently used programs. End Button and Send Button are exclusive phone functions so they cannot be redefined.
5 Microsoft ActiveSync / Using Microsoft ActiveSync, you can synchronize the information on your desktop computer with the information on your device. Synchronization compares the data on your device with your desktop computer and updates both computers with the most recent information. For example: Keep Pocket Outlook data up-to-date by synchronizing your Pocket PC with Microsoft Outlook data on your desktop computer.
Installing and Using ActiveSync Important Installation Notice Before you install ActiveSync, make sure that the USB cable on the Pocket PC is not connected to the personal computer. Connect the USB cradle only after ActiveSync is installed. 1. Installing ActiveSync: Use the Getting Started CD to install Microsoft ActiveSync 4.1 on the personal computer. ActiveSync is already installed on your Pocket PC. 2. Hardware installation: The USB cradle is a plug-and-play device.
3. Using ActiveSync After installation is complete, the ActiveSync Setup Wizard helps you customize your synchronization settings. Once you use the USB cable to connect the two devices properly, the Set Up a Partnership screen appears on the personal computer. Set it up according to your requirements. The green icon appears on the status bar of your personal computer to indicate that it is Connected. Click Explore on the Microsoft ActiveSync on the personal computer to access files in the Pocket PC.
ActiveSync synchronization settings: 1. After installation is complete, the Setup Wizard will continue to guide you. Adjust the specifications according to your actual needs. 2. Use the USB cable to connect the two devices properly and the Set Up a Partnership screen appears on the personal computer. Set it up according to your requirements. Click OK. Click Next. Check the items you want to synchronize. Click Next.
Click Finish. After installation is complete, the ActiveSync Setup Wizard helps you connect your Pocket PC to your desktop computer, set up a partnership so you can synchronize information between your Pocket PC and your desktop computer, and customize your synchronization settings. Your first synchronization process will automatically begin when you finish using the wizard. The green icon appears on the status bar of the personal computer to indicate that it is Connected.
Once you have set up ActiveSync and completed the first synchronization process, you can initiate synchronization from your Pocket PC. To switch to ActiveSync on your Pocket PC, tap , and then tap ActiveSync. For more information on how to use ActiveSync on your personal computer, run ActiveSync and refer to the ActiveSync online help. To learn more about the Pocket PC ActiveSync, switch to ActiveSync and tap and then Help. Just refer to the Help for more information.
6 Connections / Connecting to the Internet This section teaches you how to use GPRS wireless network connection. GPRS wireless networking is a convenient function for working at home or while traveling. You can use the Pocket PC to browse websites and read or send E-mails, SMS or MSN messages. Make sure that your telecom company provides this service and apply for a SIM with GPRS function. If you already have a SIM card, all you need to do is apply for the GPRS function from your service provider.
Tap , Settings, the Connections tab, and then Connection Wizard. 1. Select the country name from the list. 2. Select the carrier name from the list. 3. According to actual requirements, select the carrier name, and then tap Add Button or Edit Button. Or use the New Button to add the new network connection. 4. Search Button: Detect the currently available telecommunication service. If it is found, use the Add Button to add the highlighted selection.
Setting the GPRS Connection Tap , Settings, the Connections tab, Connections, and then the Tasks tab. 1. As shown in the screen on the left tap “Add a new modem connection.” 2. Enter the “Make New Connection” screen as shown in the screen on the left. Input a new connection name for convenience in making connections in the future. Select “Cellular Line (GPRS).” Lastly tap Next.
3. Input the Access Point Name provided by your telecom company and tap Next. 4. Input your personal information such as account number, and tap Finish.
Starting GPRS Connection or icon at the top 1. Tap the of the screen and when a message window appears tap “Turn off flight mode” and input your PIN to turn on the Phone. The icon will change to while the icon changes to . , then tap Settings to link to 2. Tap Connections. You are ready to connect GPRS. 3. Select “Manage existing connections” in Connections. Tap and hold on the newly created connection name, and then select Connect to finish GPRS connection. 4.
Disconnecting GPRS 1. Disconnect GPRS: Tap and the message window appears. Tap Disconnect. 2. Turn off Phone: Tap and the message window appears. Tap “Turn on flight mode.
Using Bluetooth Tap , Programs, Utilities, and then Bluetooth Manager. Bluetooth is a short-distance wireless communication technology with an effective range under 10 meters (30 feet). When you turn on the Bluetooth function, the indicator flashes blue. Bluetooth LED indicator (Blue) Wireless 1.Tap Manager to enable 2.Tap Bluetooth Bluetooth Connection Wizard Tap on any one of the icons on the left side of the Wizard screen, the system will ask you if you would like to activate Bluetooth.
All nearby Bluetooth devices found by the system. Tap on any one of the shortcut icons and you will be able to follow the on-screen instructions to pair with that particular device. Devices that have already been paired with are shown with a . Tap on one of the icons which represent a Bluetooth headset, when a is shown, it means that you may use that particular Bluetooth headset. Refresh Search Button: re-scan for all nearby Bluetooth devices. Change viewing method.
Bluetooth Connection Setting Tap Settings Button in the Bluetooth Wizard screen to display the Bluetooth Settings screen. Tap the General tab 1. Bluetooth Status Tap Open to enable Bluetooth function. Tap Close to disable Bluetooth function. Make sure that you disable Bluetooth function when you need to save power or if you are in locations such as an airplane or hospital that ban the use of wireless devices. 2.
Service Tap the Service tab Provide the settings about services of serial port, file transport and exchange vCard.
Serial Port If you have Bluetooth GPS software, use the product as instructed and refer to the accompanied documentation and this section to register your Pocket PC as an effective serial port or search for other serial ports. Tap the Serial Port tab Register new serial port 1. Tap Add to enter the Settings screen. If you no longer need to use a registered serial port, tap this serial port under the “Name” column to highlight and then tap Delete to delete it. 2.
Bluetooth Headset Tap the Bluetooth Headset tab 1. Select a headset from the paired list. 2. Check “Use Headset.” FTP Sharing Tap the FTP tab Specify one of the folders on your Pocket PC as a shared directory.
CSD Type Tap , Settings, the Connections tab, and then CSD Type. You must first apply for Circuit-Switched Data (CSD) service from your telecom company before you can use this function. In short, this function is similar to the modem dial-up in a personal computer. By simulating the Pocket PC as a modem and connecting through the built-in GSM device, you can use the Pocket PC to access the web. This figure is for reference only.
Connecting with a Personal Computer For more information, refer to “Microsoft ActiveSync” section. Wireless LAN Transmission Tap the Wireless Manager icon on the lower right corner of the Today screen. For more information, refer to “Using Wireless LAN” section.
7 Using Wireless LAN / Connecting to Wireless LAN This section teaches you how to use the Pocket PC’s built-in wireless LAN function to connect to the Internet. It is convenient for you to browse websites and send/receive E-mails through wireless networks at certain locations where wireless networking services are provided.
icon on the bottom right of the Today screen. Select the , Programs and then Wireless Manager. Tap This icon will show up on your screen whenever your Pocket PC has detected a usable wireless network and has connected to that network, indicating that your Pocket PC has successfully connected to the network hotspot (Access Point). At this point, the indicator on the upper left of your Pocket PC will flash orange. Tap to enter the setup screen.
Configure Your Wireless Network WLAN Setup Scenarios Location Select Networks Proxy Connection Network key or Access Point Home , Settings, the Connections tab, Connections, the Advanced tab, Select 1. Close Proxy connection 1. Authentication: Select Open 2. Not required to set Proxy 2.
