User's Manual

4.16.2 MOTION DETECTION RECORDING
To enable automatic audio video recording when motion is detected
set Motion Detection to Low Medium or High and Motion
Detection Recording to Enable .
or
Enable
Press and release On Off Esc Key until video is displayed and
then press and release RIGHT
red symbol on the monitor
A red with timer is displayed near upper left corner indicating
monitor has enabled motion detection based recording In this
mode monitor will record at least 10 seconds audio
MENU key or RIGHT
red symbol on the monitor
NOTE See section 4 10 for instructions to view recorded video
/
, ,
" "
Menu/OK → Main Menu → Motion Detection
→ Motion Detection → Low,Medium High
&
Menu/OK → Main Menu → Motion Detection
→ Motion Detection Recording→
/ /
navigation key,which is marked
by ● .
●
.
/video every
time motion is detected. The recording time could be longer
if motion is detected for more than 10 seconds.
To cancel motion detection based recording,press and release
/OK or ON/OFF/ESC navigation key marked
by ● .
: . .
16