User's Manual

4.9 VOICE ACTIVATION
set the standby time turn off screen to save
power or Audio Only mode.
If the camera not detect sound in the set time, he screen
turn off automatically .
Menu/OK → Main Menu → Voice Activation
→ Close video time→ Never,15,30, 60, 90,120
If you ,
"Never".
The screen turn on automatically when the camera detect
sound, nd the sound louder than the set sensitivity.
There 3 level sensitivity to choose Low,Medium,
High.Or choose "Never" under close video Time to disable
Audio Only ode.
Menu/OK → Main Menu → Voice Activation
→ Sensitivity → , , Medium,
: Voice Activation feature (switching from audio only
mode to audio/video mode) can be disabled by setting
"Never"(
" ").
hen Activation "Never" and monitor is
in Audio Only Mode,the monitor will not switch to audio/video
mode when sound is detected, it will only switch to audio/video
mode if a key is pressed on the monitor.
Note:In Audio/Video mode, when there is no sound detected
above set sensitivity level for 5 minutes, the speaker sound is
muted.The sound is activated when sound above set sensitivity
level is detected.Sound does not mute
" ".
:
Use this option to to
battery setup
does t
s and switches to Audio Only Mode
want the audio and video to be on all the time set close
video time to
s s
a level is
are s of from
M
Never Low High
IMPORTANT
activation
sensitivity to Sound is always on when activation
sensitivity is set to Never
W sensitivity is set to
when sensitivity is set to
Never
See Table on next page for details
10