User's Manual

3. USING THE RECEIVER(MOINTOR)
● Insert receiver in the PU cover/stand and s
lace the receiver.
● receiver , recharg-
eable battery, or .
NOTE:The receiver automatically turn on when power is supplied
using an AC adapter or via computer’s USB port.
● The receiver when the ON/OFF/ESC
pressed for 5 seconds. The welcome screen is displayed.
After a short start-up phase the
CONNECTING CAMERA 1.
.
.
Note:If the camera is powered ON and within range but the
monitor displays:CONNECTING CAMERA 1.Please reregister
camera.The camera can be registered via the MULTI CAMERA
menu .
● When ’
,
.
4. RECEIVER
following buttons to navigate:
MENU/OK button - - to display main menu and to confirm selection.
UP and DOWN buttons - - to move through individual menu
or volume and .
LEFT and RIGHT buttons - - to move through individual menu
or snap and / .
ON/OFF/ESC button - - to return to the main menu press and quickly
release.
NOTE: All within approximately 10 seconds,
.
elect flat surface to
p
Power can be supplied to the by using AC adapter
from computer's USB port using a USB cable
can also be powered on button
is
video from camera is displayed or
message is displayed on the monitor
screen
Pressing ON/OFF/ESC button for 5 seconds turns monitor off
option, see section 4.6 for details
the monitor is plugged into AC adapter or computer s
USB port charging status indicator LED will be bright red
indicating battery is getting charged
(MONITOR) MAIN MENU
Use the
options
change brightness
options
take shots do audio video recording
(
)
selections must be made
else the monitor will return to audio/video mode
06