User's Manual

Table Of Contents

W sensitivity is set to

when sensitivity is set to

Never See Table on next page for details.

Use this option to assign function to the on

the monitor. By default, up and down buttons are assigned Volume

control function, but if multiple cameras are being used and you want

to manually switch between cameras, then use this menu option to

assign Camera Selection function to up and down buttons.

NOTE: Once camera selection is assigned to the Up and Down button

the Volume menu option must be used from the Main Menu to adjust

volume (see section 4.2)

Use this option to select blue background or no background (black).

Blue or black background is displayed when an error message is

displayed on the monitor or when monitor is switching between

cameras (multi-camera in use)

hen Activation " Never" and monitor is

in Audio Only Mode, the monitor will not switch to audio/video

mode when sound is detected, it will only switch to audio/video

mode if a key is pressed on the monitor.

Note: In Audio/Video mode, when there is no sound detected

above set sensitivity level for 5 minutes, the speaker sound is

muted.The sound is activated when sound above set sensitivity

level is detected.Sound does not mute

" ".

4.11 SETTINGS(UP&DOWN BUTTONS FUNCTION)

UP and DOWN buttons

Menu/OK → Main Menu → Settings

→ Up&Down Buttons Function

4.12 SETTINGS(BACKGROUND)

Menu/OK → Main Menu → Settings → Background Display