User's Manual

Table Of Contents

3. USING THE RECEIVER(MOINTOR)

● lace the receiver.

● receiver , recharg-

eable battery, or .

NOTE: The receiver automatically turn on when power is

supplied using an AC adapter or via computer’s USB port.

● The receiver when the ON/OFF/ESC

pressed for 3 seconds. The indicator turns green

and the welcome screen is displayed. After a short start-up phase

the CONNECTING CAMERA 1.

Note: If the camera is powered ON and within range but the

monitor displays: CONNECTING CAMERA 1. Please

reregister camera.The camera can be registered via the

MULTI CAMERA menu .

● When ’

4. RECEIVER

e following buttons to navigate:

MENU/OK button - - to display main menu and to confirm selection

MENU/OK button.

UP and DOWN buttons - - to move through individual menu

or volume and .

ON/OFF/ESC button - - to return to the main menu press and quickly

release.

: All within approximately 10 seconds,

Select flat surface to p

Power can be supplied to the by using AC adapter

from computer's USB port using a USB cable

can also be powered on button

is power status

video from camera is displayed or

message is displayed on the monitor screen

Pressing ON/OFF/ESC button for 3 seconds turns monitor off

option, see section 4.5 for details

the monitor is plugged into AC adapter or computer s

USB port charging status indicator LED flashes indicating

battery is getting charged

(MONITOR) MAIN MENU

Use th

press

options

change brightness

(

)

NOTE selections must be made

else the monitor will return to audio/video mode