2.4GHZ WIRELESS H.264 DIGITAL MONITOR with 2.4” Screen USER MANUAL The pictures, diagrams and certain functions described in this manual may differ from the actual product due to different firmware version.
S AFETY AND G ENERAL I NFORMATION Important information on safe and efficient operation of this product. Before operating your Wireless Baby Monitor, please read all these safety and operating instructions completely and then retain for future reference. 1. Your Baby Monitor is designed to be an aid and should not be used as a substitute for responsible and proper adult supervision. 2.
FCC Notice to Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CARE AND MAINTENANCE 1. Keep all parts and accessories out of children's reach. 2. Fingerprints or dirt on the lens surface can adversely affect camera performance. Avoid touching the lens with your fingers. 3. Should the lens become dirty, use a blower to blow off dirt and dust, or a soft dry cloth to wipe the lens. 4. Keep the camera dry. Precipitation, humidity and other liquids contain minerals that will corrode electronic circuits. 5. Do not use or store in dusty, dirty areas. 6.
TABLE OF CONTENT Main Features··························· · ···················································1 Monitor Diagrams············· ····················· ········································2 Preparing Baby Monitor for First Time Use···································3 Using the Receiver(Monitor)·························································5 Receiver(Monitor) Main Menu ·····················································6 Register Camera··········································
MAIN FEATURES * Digital H.
MONITOR ① Up button(Volume adjustment/Select camera/Menu navigation) ② Down button(Volume adjustment/Select camera/Menu navigation) ③ OK/Menu button ④ Visual Volume indicator LEDs ⑤ Mini USB connection ⑥ RESET button ⑦ ON/OFF/ESC button ⑧ Power and charging status indicator LED ⑨ Signal LED NOTE:ON/OFF: Press and hold button for 3 to 5 seconds. ESC:Press and quickly release button.
1. PREPARING BABY MONITOR FOR FIRST TIME USE 1.1 INSTALL RECHARGEABLE BATTERY IN RECEIVER ● Open the battery compartment by pressing the battery cover and sliding the cover in the direction of the arrow. ● Insert the rechargeable battery in the mold provided, being careful to respect the polarity (+/-) (see contact surfaces). ● Close the battery compartment. Warning! There is a danger of explosion in the event the rechargeable batteries are not properly disposed off .
1.2 CHARGING RECHARGEABLE BATTERY IN RECEIVER (MONITOR) The rechargeable battery in the receiver must be fully charged before the device is used for the first time on batter y power. Warning: Replace old rechargeable battery only with original rechargeable battery. Conventional battery must not be used in the receiver. NOTE:The receiver will automatic ally turn on when plugged into AC power or computer ' s USB port .
3. USING THE RECEIVER(MOINTOR) ● Select flat surface to p lace the receiver. ● Power can be supplied to the receiver by using AC adapter, rechargeable battery, or from computer's USB port using a USB cable . NOTE:The receiver automatically turn on when power is supplied using an AC adapter or via computer’s USB port. ● The receiver can also be powered on when the ON/OFF/ESC button is pressed for 3 seconds. The power status indicator turns green and the welcome screen is displayed.
4.1 MAIN MENU Press the Menu button to display Main Menu on the monitor screen, use navigation keys to pick a menu option and then OK button to confirm selection. Press Esc key to exit from the Main Menu . Volume Brightness Multi Camera Alarm Zoom In Setting Menu/OK → Main Menu 4.2 VOLUME Use this option to adjust volume. Menu/OK → Main Menu → Volume Use up or down navigation keys to adjust volume.
4.4 ZOOM IN Use this option to enlarge the picture or zoom in on a specific region of the picture,choose from 5 different specific regions:Center,Top Right,Top Left,Bottom Right or Bottom Left. The specific region enlarged or zoomed in by 2X.Chose Original Size to cancel the enlarge or zoom out. Menu/OK → Main Menu → Specific Regions, Original Size 4.5 MULTI CAMERA(REGISTER CAMERA) Use this option to register camera if it is not already registered , before us ing it for the first time.
4.6 MULTI CAMERA ( CAMERA SELECTION) Use this option to manually select registered cameras or enable Auto Scan mode . Menu/OK → Main Menu → Multi Camera → Camera Selection → Manual Selection Select any of the registered cameras (Thumbs up sign next to the camera) to watch. Menu/OK → Main Menu → Multi Camera → Camera Selection → Auto Scan Use this option to select cycle time for camera display. Each registered camera gets display ed on the monitor for the duration selected under Auto Scan .
4.8 SETTINGS(DATE AND TIME) Use this option to set the date, time and the time format (12hour/ 24hour). Menu/OK → Main Menu → Settings → Date and Time 4.9 SETTINGS(CLOSE VIDEO TIME) Use this option to set the standby time to turn off screen to save power or setup Audio Only mode. If the camera does not detect sound in the set time, t he screen turn s off automatically and switches to Audio Only Mode .
W hen Activation sensitivity is set to "Never" and monitor is in Audio Only Mode,the monitor will not switch to audio/video mode when sound is detected, it will only switch to audio/video mode if a key is pressed on the monitor. Note:In Audio/Video mode,when there is no sound detected above set sensitivity level for 5 minutes, the speaker sound is muted.The sound is activated when sound above set sensitivity level is detected.Sound does not mute when sensitivity is set to " Never ".
11 Speaker never mutes. Once monitor switches to Audio Only mode,it stays in that mode even when sound is detected. The only way monitor switches back to audio & video mode (displays video from the camera)is if a key is pressed on the monitor. Speaker volume mutes after no sound is detected above the sensitivity level set for 5 minutes.
4.13 LANGUAGE Use this option to set the Screen Menu Display Language, c hoose from 5 different languages: English, French, German, Italian or Spanish. Menu/OK → Main Menu → Languages 4.14 SETTINGS(SYSTEM INFORMATION) Use this option to display System ID, firmware version and firmware release date .
5. ADDITIONAL REMARKS 5.1 BATTERY STATUS The battery status indicator display s 4 different charging states .When the solid battery symbol is displayed, the rechargeable battery is fully charged. The battery symbol flashes when the rechargeable battery need s to be charged . 5.2 ALARM If an alarm is set , the alarm symbol will appear on the display. 5.
