Printer User Manual
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap 1-Setting Up the Printer
- Chap 2-Using Film and Other Media
- Chap 3-Maintaining and Transporting the Printer
- Chap 4-Solving Problems
- Appendix A: Specifications
- Appendix B: Control Panel Summary
- Index
96
96 | Maintaining and Transporting the Printer
Installing the New Cutter
Remove the new blade from its package, then follow these steps to install it:
1. Attach the new cutter to the holder. Align the white pin with the white
hole as shown.
2. Firmly tighten the screw using a Phillips-head screwdriver.
3. Insert the cover, then press it closed.
Note: Reinstall the
optional SpectroProofer if
necessary, following the
instructions that came
with it.