Specifications

Chapter 4. System planning and configuration using VIOS with IVM 93
attributes: en7
State = down
attributes: en8
State = down
attributes: et7
State = down
attributes: et8
State = down
Static Routes:
Route 1:
hopcount = 0
default gateway = 172.16.1.1
DNS information:
nameserver 172.16.1.199
domain customer.com
To remove all or part of the TCP/IP configuration, use the rmtcpip command. The
rmtcpip command has the following syntax:
Usage: rmtcpip [-f] [-nextboot] {-all | [-hostname] [-routing]
[-interface ifnameList]}
rmtcpip [-f] {-all | [-namesrv] [-hostname] [-routing]
[-interface ifnameList]}
To remove all TCP/IP configuration, use the rmtcpip -f -all command.
4.4 First IVM connection
When the initial networking tasks are completed, the IVM UI should be
accessible through a Web browser. The VIOS Web Server supports HTTP and
HTTPS connections.
4.4.1 Connecting to IVM
Using a Web browser window, connect using HTTP or HTTPS to the IP address
that you assigned to the VIOS during the installation process (see 4.3.3, “Initial
network setup” on page 87).