Installation guide

HWR54G Hawking Technologies, Inc. P 7
4) WIRELESS CONFIGURATION:
The default wireless settings for the Wireless-G router are:
Setting Wireless Router
SSID
Default value: Untitled
This may be changed on the Wireless screen, on the
Wireless Router's main menu.
WEP Default value: Disabled
Use the Wireless screen, on the Wireless Router's
main menu, to enable and configure WEP.
Please set your wireless products to all use the ID: Untitled if you do not wish to change the
default settings.
If you wish to manually configure any wireless devices at this time, please select the
“Wireless” selection on top menu and click to confirm. In the Wireless Setup you will need
to create an ESSID (Wireless network identification name). You may choose to leave the
Device Name blank. (Note: After you enter you ESSID on the router please be sure that you
have already set the ESSID to match on all your other wireless devices.)
If you wish to configure WEP
(Wireless Security) you may do so in
this screen. Click the “Configure
WEP” button and follow the
instructions to setup your wireless
security. If you need further
assistance you may view the HELP
menu in the utility or refer to the
User’s Manual.