User's Manual

DTV Connections

Viewing DTV

Connection

1. Connect PDP TV's Y, PB,PR terminal in Component 1 or 2 to DTV receiver's Video Out terminal using the external cable.

2. Connect PDP TV's Audio terminals (left & right) in Component 1 or 2 to DTV receiver's Audio Out terminal using the

Audio cable.

3. It must match the component connection cable Y Pb, Pr between the PDP TV and DTV receiver.

DTV receiver's output terminal can be marked Y, PB,PR or Y, CB, CR according to products.

Some of the DTV receiver(Set-Top-Box) have a PC Connector (D-Sub 15pin), DVI connector instead of Component output .

Connect Audio Cable from the Audio output terminal of the receiver to the PC Audio input terminal of the PDP TV.

1. Turn on the PDP TV and press on the remote controller.

2. Use to move to "Component 1 or 2".

If D-Sub 15 Pin has been connected, select "PC".

If DVI-D has been connected, select "HDMI/DVI".

3. Turn on the DTV receiver and select the channel you want.

Connecting to the component terminal

Connecting to the PC/HDMI terminal

Connection terminals of other equipmetns differ by manufacturer and model.

(R)

(L)

RPBY

< DTV receiver>

(R)

(L)

RPBY

< DTV receiver>

Component Audio Cable

Analog RGB(D-Sub 15 pin) Cable

PC Audio Cable

< PDP TV Back view >

HDMI Cable

Component Connection Cable