Instruction Manual

Fabric Clip Waterproof
Bluetooth Speaker
Instruction Manual
26778
1 x IP67 Dust & Waterproof Bluetooth Speaker
1 x USB to Type-C Charging Cable
1 x Instruction Manual
Playing Time: up to 5hrs at max volume
Charge Time: 4hrs (from 0-100%)
Pairing Name: “26778”
Battery Capacity : 1800mAh
Input: DC 5V/500mA
Dust & Waterproof rating: IP67
(Be sure to fully charge the speaker before
Charging the Speaker:
Connect the provided Type-C charging cable
to a power source and to the Type-C input
port(6) on the speaker.
The LED indicator (7) will glow RED when
charging, and will turn OFF when fully
charged.
Bluetooth® Setup:
Press and hold ON/OFF Button(1)
to turn ON the speaker, LED indicator(7) will
bluetooth standby mode.
Turn on the Bluetooth function on
mobile device, Select “26778” pairing name.
Blue if successfully paired.
Speaker will automatically pair if the mobile
device has been paired before.
Press and hold ON/OFF Button(1) to turn off
the device.
* If the speaker isn’t connected to Bluetooth
it will automatically power off after 5 minutes.
Using the Speaker:
Short press the Play/Pause Button(4) to
pause or Play music.
“Vol+/Next track”(3):
Short press - increase volume
Long press - next track.
“Vol-/Previous track”(2):
Short press - reduce volume
Long press - previous track
Calling:
Short press the Play/Pause Button(4) to
answer or end the call.
Long press the Play/Pause Button(4) to
WARNING-When using this product, basic
precautions should a
lways be followed:
Read all the instructions before use.
Never store or use this product in
temperatures below 32°F (0°C) or above
115°F (45°C).
The unit’s full performance is achieved
only after 2 or 3 completed charge and
discharge cycles.
Keep out of reach of children.
Do not use the device in excess of its
output rating. Overload outputs above
Do not use the device if damaged or
explosion or risk of injury.
Do not disassemble the device. For
professional. Incorrect reassembly may
temperatures above 104°F may cause
explosion.
use only identical replacement parts to
ensure product safety.
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
5.
6.
7.
•
•
•
•
•
•
1.
•
•
2.
•
•
•
•
•
3.
•
•
•
4.
•
•
ON/OFF Button
Vol-/Previous Track
Vol+/Next
Track
Play/Pause
AUX Line Input
Type-C Input Port
LED Indicator
What’s included:
Functions:
Instructions:
SAFETY PRECAUTIONS:
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including
interference that may cause undesired operation.
Warning:
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
(1)
(2)
*
FCC Statement:
reject the call.
AUX Connection:
Connect a AUX cable(NOT INCLUDED) to
the 3.5mm Aux input port(5) of the speaker
and mobile device to play music directly.
IP67 DustProof and Waterproof Rating::
The speaker can be submerged up to
1 meter of water for 30 minutes without
causing any damage.
5.
•
6.
•
MADE IN CHINA
41.25mm
89mm
turn solid
size:165 x 89mm
80G铜版纸
单黑印刷
1
2
3
4
5
6
7
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance
with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in
portable exposure condition without restriction.