Specifications

T
OUCH SCREEN
_____________________________________________________________________________
For keyboard less operation, the E -T ouch Magnum 120/150
provides an optional touch screen. The E-T ouch Magnum system
can use either ELO r es i s ti ve type touch screen or 5 wires resistive
touch screen. This chapter details the pr ocedur es to ins tall the
software dr iver s under DOS and Windows operation.
Elo Touch screen Driver Installation
___________________________________________________
T he E lo r es is tive touch and I ntell i touch will use the s ame dr iver s
and utilities , which are s tor ed in the Dr iver CD diskette.
System Requirements
T he DOS drivers will run on any system with DOS 2.0 or later
version. The Windows drivers will run on any system with Windows
3.1 or later versions. The DOS demonstration program requires a
VGA color display. The touch screen calibration program for DOS
suppor ts standard and VE S A-compatible dis play modes. Otherwise,
all software is video independent. An Elo touch screen must be
installed on the dis play and connected to a s er i al or bus controller.
About Elo Software
Software Included
T he accom pan y i n g DOS and Windows Driver Disk contains the
following Elo dr iver software:
Elo DEV
T ouch screen driver program for DOS :
T his program makes all Elo touch screen controllers, including s er ial
RS -232, PC-Bus, and Micr o Channel versions look the s ame to other
driver and appli cation programs.
Monitor Mouse for DOS
Mouse emulation driver for DOS :
T his program combines touch input from EloDEV and mous e input
from your mouse dr iver into a s i ngl e MOUS E . COM-compatible
application interface.