User`s manual

30
Reset Configuration Data
This setting allows you to clear ESCD data. The default is Disabled.
Disabled: Normal Setting.
Enabled: If you have plugged in some Legacy cards to the system and they were
recorded into ESCD (Extended System Configuration Data), you can set
this field to Enabled in order to clear ESCD.
Resources Controlled by
Determines what controls system PNP/PCI resources. The default is Auto (ESCD).
Manual: PNP Card
s resources are controlled manually. The IRQ Resources
field becomes available and you can set which IRQ-X and DMA-X are
assigned to PCI/ISA PNP or Legacy ISA Cards.
Auto: If your ISA card and PCI cards are all PNP cards , BIOS assigns the
interrupt resource automatically.
PCI/VGA Palette Snoop
This item is designed to overcome problems that can be caused by some
nonstandard VGA cards. This board includes a built-in VGA system that does not
require palette snooping so you must leave this item disabled.
Options: Enabled , Disabled.
6.9 PC Health Status
This section shows the parameters in determining the PC Health Status. These
parameters include temperatures, fan speeds and voltages.
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
CPU Warning Temperature
Disabled ITEM HELP
Current System Temp.
39C/102
F
Current CPU1Temperature
24 C/75
F
Current CPUFAN1 Speed
2721 RP
M
Current CPUFAN2 Speed
0 RPM
Current CPUFAN3 Speed
0 RPM
Vagp (V)
1.53V
Vcore(V)
1.47V
Vdimm(V)
2.54V
+ 5 V
5.10V
+ 12 V
11.85V
- 12 V
-11.45V
- 5 V
-4.89V