User guide

11
Set Alarms
Adjust
Set Clock
Early
Dose
Set Alarms
Adjust
Set Clock
Early
Dose
Full Tray Reset
Full Tray Reset
Getting Started
Note: The MedSmart Unit can be programmed to alarm/dispense from 1 to 6 doses of pills each
day.
■ Adjust the # Per Day setting by pushing the - or + buttons to decrease or increase the number of
alarms you want to occur in a 24-hour period.
■ Push the Set Alarms
button again to accept the setting and advance. Alarms Left is
automatically adjusted, so the next setting to adjust will be the Next Alarm, which will begin
flashing.
Note: The number of Alarm Times to set is based on the previously set
# Per Day setting.
Therefore, you will only be able to create alarm/dose times for 1 Alarm if that is the # Per Day
setting, or as many as 6 Alarms if that is the # Per Day setting.
Dispensing Times
■ Cycle through the Next Alarm numbers by pushing the - or + buttons. End will also cycle through
as one of the choices. Begin setting Alarms with number 1. This will be the first dose of the day.
■ Push the Set Alarms
button while 1 is flashing to set a time for this dose and alarm. Hours will
then begin flashing.
■ Adjust the hour by pushing the - or + buttons to decrease or increase the time and AM/PM settings.
■ Push the Set Alarms
button again to accept the setting and advance. Minutes will begin
flashing.
■ Follow the same procedure to adjust the Minutes, then accept by pushing the Set Alarms
button.
Next Alarm number will begin flashing.
■ Cycle through the Next Alarm numbers and set the Alarm Time for each using the previous
procedure.
■ When all Alarm Times are correctly set, cycle through to End and push the Set Alarm
button to
accept and store all settings.
Note: Two Alarm Times can be set simultaneously if one dose of medications will not fit within only
one cell of the tray. The tray will immediately advance after the first dose is dispensed.
Reminder times and alarms are now set. Next Alarm will now show the next reminder/alarm number
and its dispensing time. As each medication dose is taken, the display will show the reminder time for
the next dose of the day.
Setting Time, Date, Dispensing Reminder/Alarm Times
Reminders per Day