OPERATING INSTRUCTIONS e-pill® Medication Reminders e-pill Vibrating 12 Alarm Pager MEDICATION REMINDER Distributor: e-pill, LLC | Medication Reminders 70 Walnut Street Wellesley, MA 02481, USA 781-239-8255 or Toll-Free: 800-549-0095 www.epill.
e-pill Vibrating 12 Alarm Pager General Information Thank you for purchasing an e-pill Medication Reminder. This section provides important general information about your new e-pill Vibrating 12 Alarm Pager. In this manual we will refer to your e-pill Medication Reminder device as the “Vibrating Pager Reminder”. Beep or Vibration Switch (B O V) Your Vibrating Pager Reminder has a switch on the side labeled B O V.
12-Second Delay NOTES: When entering a timing or adjustment mode, you have twelve seconds to enter a new setting. If you make no change within 12 seconds, the display will revert back to the mode name – if this happens, simply press the ENTER button again to return to the mode being set and begin programming again. One push of the light button and the light stays on for 10 seconds and then turns off automatically. It cannot be turned off manually.
Many Uses for the Vibrating Pager Reminder • • • • • • • • • NOTES: Your Vibrating Pager Reminder is great for reminding you to take medications (Rx/OTC) or vitamins. You can set multiple Alarms (up to 12 daily alarms—no reset required) for this purpose, or you can use the Timer set to repeat (R) the interval between medication doses. Use the Meeting Timer to track time during meetings, presentations, or during any interval from 10 to 120 minutes.
NOTES: Operating Modes Your Vibrating Pager Reminder has seven operating modes (accessed by the Mode button) as described on the following pages. 1. Time and date adjustment (TIME & DATE): Use to set time and date. 2. Vibration and Beep adjustment (VIB & BEEP): Use to adjust Vibration Speed (1 = low, 2 = medium, 3 = high), Beep Volume (1-3), Number of beeps (1-6). 3. 12 Alarms (ALARMS SET): Use to set up to 12 alarms in a 24-hour period.
1. Time, Date and Daylight Saving Settings The e-pill Vibrating Pager Reminder will automatically adjust the time for daylight savings time; please see details below on how to turn this feature on or off). (TIP: Hold Set button down to rapidly advance counting). Q&A e-pill Vibrating 12 Alarm Pager 1. The Unit appears stuck in the Timer or Meeting Timer: try pushing the two middle buttons simultaneously (just for a second) until the display blinks, and then press the mode button to exit.
MEETING TIMER NOTES: 1. Once a meeting time is started, it will repeat every 1/2 hour for durations of 10-30 minutes, and repeat every hour for durations of 31-60 minutes, and repeat every other hour for durations of 61-120 minutes. For example, program a meeting time of 50 minutes and start it on the hour, it will go for 50 minutes, wait 10 minutes and then begin again on the next hour.
Note 1. A set alarm will signal in all other modes unless alarm switch (on side of unit) is set to O (off). An alarm remains set after its time has passed, and will sound again every successive day until it is erased. Note 2. Set alarms are automatically organized in the order of next to go off, according to the time of day. In other words, when you check your set alarms, ALARM 01 will be the next to signal, then ALARM 02…etc. Note 3.
Checking Custom Timer programming NOTES for the Custom Timer: 1. When programming, if you have selected all the alerts you need, you can press Mode at any time to save your programming. To start the timer, press Enter once, then Mode once. 2. Once the custom timer is programmed, it will remain programmed until all programming is erased. 3. To restart timer after countdown completes for one-time countdown or for count-up, press M to restart (at any time during count-up). 4.
Stop Countdown Set Alert B the same way as you set A. You can set one or all of the alerts A,B,C, D,E,F. TIP: To skip an After setting the alert during proalerts you want, gramming, press proceed to the Enter button STEP 3 below. two times.
