User Guide

MD.2 Users Manual
43
14. List of important phone numbers
For assistance with your MD.2, please call Support Center toll free [phone].
For assistance with billing information, please call toll free [phone].
15. Regulatory Agency Information
Telephone Connection Information
The Federal Communications Commission (FCC) has established rules that permit the use of this
device to be directly connected to the telephone network. The unit is provided with two
standardized plugs and two standardized cables with jacks to be used to make this connection.
Non standard cables/jacks should not be used. The FCC also requires that this unit not be used
on party line or coin operated telephone lines.
Telephone Company Information
Should the telephone company request information about the devices connected to their telephone
lines, the following information pertains to the IMD MD.2:
A. Telephone number Unit is connected to: Your telephone number
B. Ring Equivalence Number (REN): 0.7B
C. USOC jack required: RJ11C
D. FCC Registration Number 6HYUSA-33790-MD-E
Items B, C, D can be found on the MD.2 product label applied to the base of the unit. In most
areas, the sum of the RENs of all devices on the line should not exceed five (5.0). If too many
devices are attached, they may not ring properly.
The telephone company also may make changes in its technical operations and procedures over
time. If such changes affect the compatibility of, or use, of this device, the telephone company is
required to give adequate notices of these changes.
FCC Emissions Compliance Statement
Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void user’s authority to operate this equipment.