User Guide

MD.2 Users Manual
23
7. Adjusting Your MD.2
Setup Key
Time, display brightness, and volume are adjusted with this key. To start, press the Setup key.
The display will read:
Time
The IMD Support Center will set the time, time zone and Daylight Savings Time according to
your region. If, after setup, the time is incorrect call the Support Center for assistance.
LCD (Screen Brightness)
From the main setup screen, use the Right or Left arrow key until the “LCD” field flashes on
the display screen. Press OK. The display will read:
When the Up arrow key is pressed, the higher the contrast will get. If less contrast is desired
press the Down arrow key. The more times the Down arrow is pressed the weaker the contrast
will be. When you are finished, press OK. The display will return to the following setup screen:
Vol (Volume Setting)
From the main setup screen, use the Right or Left arrow key until the Vol field flashes on the
display screen. Press OK. The display will read:
Press the Up arrow key to raise the volume, press the Down arrow key to lower the volume.
NOTE: Each time you press the UP or DOWN arrow key, the unit will voice "Thank You".
There are only three volume setting to choose from, low, medium (default setting) and high.
When you have set the volume, press OK. The display will return to the main setup screen. Use
the right arrow key until Quit is flashing.
Se t up Op t i ons
<< T ime LCD Vo l Qu i t
Se t up Op t i ons
<< Time LCD Vo l Qu i t
Se t up Op t i ons
<< Time LCD Vo l Qu i t
Se t up Op t i ons
<< Time LCD Vol Qu i t
Con t r as t Ad justment
Up /Dn : Ad j ust OK:Qui t
Vo l ume Adjustment
Up /Dn : Ad j ust OK:Qui t