Operation Manual

›

Control Unit

(1) LED message SLOPE TOO STRONG - In this position the camper cannot be levelled (the surface

is not even enough). If necessary, switch over to manual mode.

(2) LED message LOW VOLTAGE - the battery is empty or the voltage is too low to be able to work

safely.

(3) LED message ENGAGE HAND BRAKE - Message indicating that the hand brake is disengaged.

When the hand brake is engaged again, the LED will go out.

(4) LED message JACKS NOT (fully) RETRACTED-Oneormorejacksareextendedornotfully

retracted.

(5) Button ON/OFF - switches the control panel on or off.

(6) Button MANUAL MODE - the switch panel is in manual mode.

(7) button AUTOMATIC MODE ON - indicates that the system is ready for automatic levelling of the

camper.

(8) Button RETRACT ALL JACKS - automatically retracts all jacks.

(9) LED message MANUAL MODE - indicates that the camper can now be brought to the correct

level manually.

(10) Button LEFT SIDE-controlsretractingandextendingtheleftjacks.

(11) Button REAR SIDE-controlsretractingandextendingtherearjacks.

(12) Button FRONT SIDE-controlsretractingandextendingthefrontjacks.

(13) Button RIGHT SIDE-controlsretractingandextendingtherightjacks.

(14) LED message LEVEL-indicatesthatthecamperisbroughttotherequiredlevel.

(15) Inclination-function - to empty easily the waste-watertank.

1315

2 3 4 5