Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R130142 Hardware Installation
Platform Alignment
To accomplish alignment of the Scanning Platform, proceed as follows:
1. Place a machinist’s level on the leveling blocks located on the inner side of each
end column. See Figure 3-9.
Do not make any adjustments to the alignment block.
The adjustment block is factory adjusted. Any
adjustment will render the block unusable.
Figure 3-9 Verifying Platform Alignment
2. Loosen the hold-down mounting bolts.
Alignment
Block
Machinist’s
Level