Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R130124 Hardware Installation
Unpacking Instructions
The Scanning Platform is carefully packed for shipment. The platform arrives on
dollies so that you are able to move it directly into position in the mill. See Figure
3-1. Depending on the location of the mill, some Smart Platforms will arrive with
the dollies bolted to a skid. For those shipments, unpacking instructions are posted
inside the crate.
Figure 3-1 Scanning Platform on Shipping Dollies
Various components and cables are removed and packed separately for shipment.
The Scanning Platform comes with a bill of lading. Use the checklist below during
the unpacking process.
Checklist
❏ Inspect the platform and components for dents, scratches, and damaged parts.
❏ Verify that the delivered components match the bill of lading.
❏ If there is minor damage, make a note of the damage on the bill of lading.
Photograph the damage, when possible.
❏ If there is major damage, immediately notify the ABB shipping department in
Columbus, Ohio or Dundalk, Ireland.