Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R130112 Product Overview
Service Workstation
The Service Workstation is used for the local interaction with the ABB Smart
Processing Center (ASPC). There are two versions of the Service Workstation. The
older version can be any 386 or compatible PC or lap top computer with the proper
software load. For software setup information see the appropriate Measure
IT
Scanning Platform System Software Manual, 3BUS 208 [049-054] RXX01. It is
possible that an ABB MasterAid 220 can serve as a workstation for both the 1190
system and the Scanning Platform.
The newer version of the Service Workstation needs a more powerful PC. For the
detailed hardware requirements and the instructions for loading the software consult
the Scanning Platform Service Workstation Getting Started Manual (either 3BUS
208 045 RXX01 for an NT operating system or 3BUS 208 046 RXX01 for a Windows
2000 operating system).
Communications via a serial port on the ASPC must be used for the older version
and can be used by the newer version. The connection can use RS232 for shorter
distances or a 20MA current loop for remote use. An Ethernet connection can be
used with the newer version workstation.
The Service Workstation provides the capability to interface with various utilities
that are used for monitoring, tuning, and diagnostics of the electronics and the
sensors on the platform.