Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R1301 7Product Overview
Mechanical Structure
The platform beams are constructed of custom pressed, steel box beams. The cross
section is shown in Figure 1-2.
Figure 1-2 Platform Cross Section
The end columns are also made of steel box sections. The Scanning Platform is
welded together in a rigid ‘‘O”. The end columns house on-platform electronics
and a drive system.
For longitudinal expansion, there is a Teflon
® glide pad mounted under one end
column. The other end column is fixed.
Torsion
Box
Payload
Area